ICHINEN TASCO CO., LTD.

64-0829-70　Earth Leakage Circuit Breaker Tester　TA452RD

Features

Ideal for determining the quality of ground fault breaker!
Easy Operation (Remote Measurement)
Using the remote measurement function, you can automatically measure data by simply connecting the measurement cord to the terminal.
The circuit voltage is displayed first, and the operation time or sensitivity current measurement starts one second later.
Automatic voltage determination Since 100 V circuit, 200 V circuit and 400 V circuit are automatically determined, voltage switching is not required.
Sensitivity current measurement The test current is automatically increased and the current value at the time of the trip is displayed.
In order to prevent electric shock due to ground failure during measurement using the contact voltage automatic detection ground, the voltage of the ground electrode or the protective conductor is automatically detected during ground fault circuit breaker test (when the test current is applied), and the measurement is stopped at 50 V AC and a warning is issued. Note:This instrument cannot measure the test current: "2 times the rated sensitivity current" or "500 A" in the anti-limit type ground fault circuit breaker. (JIS C 8371) There are other wiring methods. Refer to the instruction manual for details.

Spec

Operating time and sensitivity current measurement
[Microwave x 5]
rated voltage: 100 V ± 10%, 200 V -10 to + 32% 400 V ± 10%, 50/60 Hz
rating Sensitivity Current: 15/30/50/100 mA
measurement range: Test duration 0 to 200 ms
[Microwave x 1]
rated voltage: 100 V ± 10%, 200 V -10 to + 32% 400 V ± 10%, 50/60 Hz
rating Sensitivity Current: 15/30/50/100/200/500 mA
measurement range: Test duration 0 to 2000 ms
[Microwave x 1/2]
rated voltage: 100 V ± 10%, 200 V -10 to + 32% 400 V ± 10%, 50/60 Hz
rating Sensitivity Current: 15/30/50/100/200/500 mA
measurement range: Test duration 0 to 2000 ms
Sensitivity Current (mA)
rated voltage: 100 V ± 10%, 200 V -10 to + 32% 400 V ± 10%, 50/60 Hz
rating Sensitivity Current: 15/30/50/100/200/500 mA
measurement range: 40 to 110% of rating sensitivity current (current rise every 5%), test time 300 ms, to 15 times
Voltage measurement range: 80 to 450 V 50/60 Hz
View: 1999 (3 1/2 digits) Large LCD
Operating temperature and humidity range: 0 to + 40 °C, relative humidity 85% (non-condensing)
Storage Temperature and Humidity Range: -20 to + 60 °C, Relative Humidity 85% (non-condensing)
Withstand voltage: 3700 VAC/1 minute (between electrical circuit and outer box)
insulation Resistance: 10 MΩ or More/1000 V (Between Electrical Circuit and Outer Box)
Power save function: 1. The LCD turns off approximately 3 minutes after the switch is operated, and the tester enters the power save state (current consumption: approximately 70 μA). 2.The backlight turns off after about 1 minute.
Uses battery: AA size battery R6P (1.5 V) x 8
Dimensions: W 186 x D 89 x H 167 mm
Mass: 960 g (including battery)
Number of measurements: 1200 or more (measured in interval for 30 seconds at a × 1/2 range of 100 mA)
Accessories: Measurement Cord x 1, Alligator Warp Cord x 1, Tip metal bracket Long x 2, Shoulder Belt x 1, Cord Case x 1, AA size battery x 8, Instruction Manual

Order No.	64-0829-70
Model No.	TA452RD
JAN Code	4528422300080
Standard price	JPY: 83,000 USD: 520.28 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock