MCP130 Microcontroller Supervisory and Reset Circuit. The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor. Features. Holds Microcontroller in Reset until supply voltage reaches stable operating level Resets Microcontroller during power loss Active low RESET pin Open drain output Internal 5 kΩ Pull-Up Resistor Holds RESET for 350 ms (typical) RESET to VCC:1.0V Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature 45 μA typical operating current
Spec
Quantity:1set(3000pieces)
Number of Supervisors:1
Output Driver:Open Drain
Power Fail Detection:Yes
Mounting Type:Surface Mount
Package Type:SOT-23
Pin Count:3
Maximum Reset Active Time:10µs
Dimensions:3.04 x 1.4 x 1.02mm
Height:1.02mm
Minimum Operating Temperature:-40 °C
CODE No.:165-3519
Order No.Order No.ss="init">
［Discontinued］Microchip MCP130T-460I/TT, Voltage Supervisor 4.47V 3-Pin, SOT-23 MCP130T-460I/TT 64-0591-99 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
MCP130 Microcontroller Supervisory and Reset Circuit. The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor. Features. Holds Microcontroller in Reset until supply voltage reaches stable operating level Resets Microcontroller during power loss Active low RESET pin Open drain output Internal 5 kΩ Pull-Up Resistor Holds RESET for 350 ms (typical) RESET to VCC:1.0V Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature 45 μA typical operating current
