63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
FeaturesFeatures class="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Facom
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
-
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
SpecSpec class="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Facom
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
-
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Spec
- Quantity:1piece
- Series : 985
- Crimp Tool Type : Ratchet
- Overall Length : 230mm
- CODE No.:384-9050
-
Order No.
63-7518-38
Model No.
985895
Standard price
JPY: 15,500
USD: 97.23
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in JapanStock in Japanass="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Facom
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
-
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
仕様
- Quantity:1piece
- Series : 985
- Crimp Tool Type : Ratchet
- Overall Length : 230mm
- CODE No.:384-9050
-
アズワン品番
63-7518-38
型番
985895
標準価格
JPY: 15,500
USD: 97.23
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier Stock
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
SpecSpec class="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Facom
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
-
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Spec
- Quantity:1piece
- Series : 985
- Crimp Tool Type : Ratchet
- Overall Length : 230mm
- CODE No.:384-9050
-
Order No.
63-7518-38
Model No.
985895
Standard price
JPY: 15,500
USD: 97.23
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in JapanStock in Japanass="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Facom
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
-
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
仕様
- Quantity:1piece
- Series : 985
- Crimp Tool Type : Ratchet
- Overall Length : 230mm
- CODE No.:384-9050
-
アズワン品番
63-7518-38
型番
985895
標準価格
JPY: 15,500
USD: 97.23
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
Supplier Stock
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895
特徴
- Serkan ergonomic crimp tools with ratchet system. Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free. Features and Benefits: High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles) Double crimping (pre-insulated terminals) Reverse crimping: terminal is placed in the fixed part for greater precision Stainless steel dies Ambidextrous pliers Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Spec
- Quantity:1piece
- Series : 985
- Crimp Tool Type : Ratchet
- Overall Length : 230mm
- CODE No.:384-9050
| Order No. | 63-7518-38 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | 985895 | ||||||||||||||
| Standard price |
JPY: 15,500
USD: 97.23
Excange rate 1USD= 159.42JPY
Valid price in Japan |
||||||||||||||
| Quantity | 1piece | ||||||||||||||
Stock in JapanStock in Japanass="init">
63-7518-38 Facom 985 Ratchet Crimp Tool for Insulated Terminal 985895特徴
仕様
| |||||||||||||||