AS ONE AS ONE

Listed products : 3 milion productsListed products : 3 milion products"init"> ［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK 63-5485-96 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
ELECOM CO., LTD

63-5485-96　［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK

Features

  • This is an in-vehicle magnet holder for smartphones that can be installed in the car and easily attached and removed.
  • It is a strong gel sucker type that can firmly adsorb and fix the holder if it is a shallow shibo.
  • * If the suction force of the suction cup becomes weak, washing with water will restore the suction force.
  • It has an installation auxiliary plate to assist the suction cup installation on the dashboard with deep shibo.
  • Equipped with neodymium magnets inside the holder, the smartphone can be attached and detached with one hand.
  • Stretchable arm that can be extended by about 50 mm and a mechanism that rotates the entire arm by 270°, the length and orientation can be freely adjusted.
  • It has a finger ring with a special structure that suppresses the tilt caused by the self-weight of the smartphone and is optimized for the magnet holder.
  • Smartphones can be placed vertically or horizontally.
  • Fingering helps prevent your phone from falling by putting your finger through the ring during normal use.
  • Adopts a ball joint that can be freely adjusted to an angle that makes it easy to see a smartphone.
  • Comes with an alcohol pad for convenient cleaning when installing the holder or attaching the finger ring.

Spec

  • Maximum external dimensions: Width 63 x Depth 170 x Height 48 mm (Depend on the deployment method)
  • Weight cookies: about 105 g
  • Accessory: Fingering x 1, Alcohol Pad x 1, Installation auxiliary plate x 1
  • Weight: about 250 g or less
  • material: Heat-resistant ABS, Silicon, iron, PU, TPU
  • Color: Black
  • gel suction cup mounting
  • Angular telescopic stay
  •  

Package size：170×70×180 mm　310 g　 [About Package size]

Order No.Order No.ss="init"> ［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK 63-5485-96 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
ELECOM CO., LTD

63-5485-96　［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK

特徴

  • This is an in-vehicle magnet holder for smartphones that can be installed in the car and easily attached and removed.
  • It is a strong gel sucker type that can firmly adsorb and fix the holder if it is a shallow shibo.
  • * If the suction force of the suction cup becomes weak, washing with water will restore the suction force.
  • It has an installation auxiliary plate to assist the suction cup installation on the dashboard with deep shibo.
  • Equipped with neodymium magnets inside the holder, the smartphone can be attached and detached with one hand.
  • Stretchable arm that can be extended by about 50 mm and a mechanism that rotates the entire arm by 270°, the length and orientation can be freely adjusted.
  • It has a finger ring with a special structure that suppresses the tilt caused by the self-weight of the smartphone and is optimized for the magnet holder.
  • Smartphones can be placed vertically or horizontally.
  • Fingering helps prevent your phone from falling by putting your finger through the ring during normal use.
  • Adopts a ball joint that can be freely adjusted to an angle that makes it easy to see a smartphone.
  • Comes with an alcohol pad for convenient cleaning when installing the holder or attaching the finger ring.

仕様

  • Maximum external dimensions: Width 63 x Depth 170 x Height 48 mm (Depend on the deployment method)
  • Weight cookies: about 105 g
  • Accessory: Fingering x 1, Alcohol Pad x 1, Installation auxiliary plate x 1
  • Weight: about 250 g or less
  • material: Heat-resistant ABS, Silicon, iron, PU, TPU
  • Color: Black
  • gel suction cup mounting
  • Angular telescopic stay
  •  

荷姿サイズ：170×70×180 mm　310 g　 [荷姿サイズについて]

アズワン品番 63-5485-96
Model No.ASONEs="init"> ［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK 63-5485-96 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
ELECOM CO., LTD

63-5485-96　［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm)　P-CARS09BK

Features

  • This is an in-vehicle magnet holder for smartphones that can be installed in the car and easily attached and removed.
  • It is a strong gel sucker type that can firmly adsorb and fix the holder if it is a shallow shibo.
  • * If the suction force of the suction cup becomes weak, washing with water will restore the suction force.
  • It has an installation auxiliary plate to assist the suction cup installation on the dashboard with deep shibo.
  • Equipped with neodymium magnets inside the holder, the smartphone can be attached and detached with one hand.
  • Stretchable arm that can be extended by about 50 mm and a mechanism that rotates the entire arm by 270°, the length and orientation can be freely adjusted.
  • It has a finger ring with a special structure that suppresses the tilt caused by the self-weight of the smartphone and is optimized for the magnet holder.
  • Smartphones can be placed vertically or horizontally.
  • Fingering helps prevent your phone from falling by putting your finger through the ring during normal use.
  • Adopts a ball joint that can be freely adjusted to an angle that makes it easy to see a smartphone.
  • Comes with an alcohol pad for convenient cleaning when installing the holder or attaching the finger ring.

Spec

  • Maximum external dimensions: Width 63 x Depth 170 x Height 48 mm (Depend on the deployment method)
  • Weight cookies: about 105 g
  • Accessory: Fingering x 1, Alcohol Pad x 1, Installation auxiliary plate x 1
  • Weight: about 250 g or less
  • material: Heat-resistant ABS, Silicon, iron, PU, TPU
  • Color: Black
  • gel suction cup mounting
  • Angular telescopic stay
  •  

Package size：170×70×180 mm　310 g　 [About Package size]

Order No. 63-5485-96
Model No. P-CARS09BK
JAN Code 4549550122320
Standard price JPY: 4,670 USD: 29.27
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
  Discontinued
Stock in Japan -

This page is the page of ［Discontinued］On-Vehicle Magnet Holder for Smartphone (Powerful Gel Sucker/Arm) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.