63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
Features
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
SpecSpec class="init">
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
SpecSpec class="init">
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
Package size：155×235×50 mm 170 g
[About Package size]
Order No.
63-5173-27
Model No.Model No. class="init">
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
荷姿サイズ：155×235×50 mm 170 g
[荷姿サイズについて]
アズワン品番
63-5173-27
型番
P-NUCLEO-IHM001
Standard price
JPY: 5,690
USD: 35.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
荷姿サイズ：155×235×50 mm 170 g
[荷姿サイズについて]
アズワン品番
63-5173-27
型番
P-NUCLEO-IHM001
標準価格
JPY: 5,690
USD: 35.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
-
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
SpecSpec class="init">
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
Package size：155×235×50 mm 170 g
[About Package size]
Order No.
63-5173-27
Model No.Model No. class="init">
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
荷姿サイズ：155×235×50 mm 170 g
[荷姿サイズについて]
アズワン品番
63-5173-27
型番
P-NUCLEO-IHM001
Standard price
JPY: 5,690
USD: 35.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001 63-5173-27 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
-
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
-
荷姿サイズ：155×235×50 mm 170 g
[荷姿サイズについて]
アズワン品番
63-5173-27
型番
P-NUCLEO-IHM001
標準価格
JPY: 5,690
USD: 35.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
-
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001
特徴
- P-NUCLEO-IHM001 BLDC Motor Control Development Kit. The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection. The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe. The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier. The Arduino connectivity support and ST Morpho headers make it easy to expand. An external power supply 8 V to 12 V, is required to power the kit. X-NUCLEO-IHM07M1 features. 3 phase driver board for BLDC/PMSM motors based on L6230 Nominal operating voltage range from 8 V to 48 V dc 2.8 A output peak current (1.4 A root mean square) Non-dissipative overcurrent detection and protection Full compatible with ST 6-step or ST-FOC-control algorithm Full support for sensorless and sensor mode 3-Shunt and 1-Shunt configurable jumpers for motor current sensing Hall encoder motor sensor connector and circuit Potentiometer available for speed regulation Compatible with STM32 Nucleo boards Equipped with ST Morpho connectors. NUCLEO-F302R8 features. STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os Mbed-enabled (http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Two push buttons: "User" and "Reset". 3 phase motor. Bull-Running model BR2804-1700 kV Nominal voltage 11.1 V dc (battery up to 3 S) Maximum DC current: 5 A Seven pole pairs
仕様
- Quantity：1piece
- Power Management Function : Motor Controller
- Kit Classification : Development Kit
- Kit Name : Nucleo Pack
- CODE No.:906-4630
Package size：155×235×50 mm 170 g [About Package size]
| Order No. | 63-5173-27 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Model No.Model No. class="init">
63-5173-27 ［Discontinued］STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller P-NUCLEO-IHM001特徴
仕様
荷姿サイズ：155×235×50 mm 170 g [荷姿サイズについて]
| ||||||||||||||||||||||||||||||