63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
FeaturesFeatures class="init">
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
STMicroelectronics
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
-
特徴
- L298 Dual Bridge Motor Driver. The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. Features. Operating supply voltage up to 46 V Total DC current of up to 4 A Low saturation voltage Over-temperature protection Logical "0" input voltage up to 1.5 V (high noise immunity)
SpecSpec class="init">
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR 【AXEL GLOBAL】ASONE
Contact us
STMicroelectronics
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
-
Features
- L298 Dual Bridge Motor Driver. The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. Features. Operating supply voltage up to 46 V Total DC current of up to 4 A Low saturation voltage Over-temperature protection Logical "0" input voltage up to 1.5 V (high noise immunity)
Spec
- Quantity：1bag(5pieces)
- Motor Type : Brushed DC
- Output Configuration : Dual Full Bridge
- Maximum IGBT Collector Current : 4A
- Maximum Collector Emitter Voltage : 46 V
- Mounting Type : Surface Mount
- Package Type : PowerSO
- Pin Count : 20
- Minimum Operating Supply Voltage : 4.8 V
- Typical Switching Frequency : 25kHz
- Maximum Operating Temperature : +130 °C
- CODE No.:880-5308
-
Order No.
63-5160-56
Model No.
L298P013TR
Standard price
JPY: 12,900
USD: 80.92
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1bag(5pieces)
Stock in Japan
Supplier Stock
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
特徴
- L298 Dual Bridge Motor Driver. The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. Features. Operating supply voltage up to 46 V Total DC current of up to 4 A Low saturation voltage Over-temperature protection Logical "0" input voltage up to 1.5 V (high noise immunity)
SpecSpec class="init">
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR 【AXEL GLOBAL】ASONE
Contact us
STMicroelectronics
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
-
Features
- L298 Dual Bridge Motor Driver. The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. Features. Operating supply voltage up to 46 V Total DC current of up to 4 A Low saturation voltage Over-temperature protection Logical "0" input voltage up to 1.5 V (high noise immunity)
Spec
- Quantity：1bag(5pieces)
- Motor Type : Brushed DC
- Output Configuration : Dual Full Bridge
- Maximum IGBT Collector Current : 4A
- Maximum Collector Emitter Voltage : 46 V
- Mounting Type : Surface Mount
- Package Type : PowerSO
- Pin Count : 20
- Minimum Operating Supply Voltage : 4.8 V
- Typical Switching Frequency : 25kHz
- Maximum Operating Temperature : +130 °C
- CODE No.:880-5308
-
Order No.
63-5160-56
Model No.
L298P013TR
Standard price
JPY: 12,900
USD: 80.92
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1bag(5pieces)
Stock in Japan
Supplier Stock
63-5160-56 STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO L298P013TR
Features
- L298 Dual Bridge Motor Driver. The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage. Features. Operating supply voltage up to 46 V Total DC current of up to 4 A Low saturation voltage Over-temperature protection Logical "0" input voltage up to 1.5 V (high noise immunity)
Spec
- Quantity：1bag(5pieces)
- Motor Type : Brushed DC
- Output Configuration : Dual Full Bridge
- Maximum IGBT Collector Current : 4A
- Maximum Collector Emitter Voltage : 46 V
- Mounting Type : Surface Mount
- Package Type : PowerSO
- Pin Count : 20
- Minimum Operating Supply Voltage : 4.8 V
- Typical Switching Frequency : 25kHz
- Maximum Operating Temperature : +130 °C
- CODE No.:880-5308
| Order No. | 63-5160-56 | |
|---|---|---|
| Model No. | L298P013TR | |
| Standard price |
JPY: 12,900
USD: 80.92
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1bag(5pieces) | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|