Features

• Raspberry Pi USB to TTL Level Serial UART Converter Cable, FTDI Chip. The TTL-232R-Rpi from FTDI is a USB to TTL level serial UART converter cable designed for use with a Raspberry Pi. Upon inspection, there is a USB connector with USB 2.0 full speed compatibility and 3 single pole 0.1m pitch header that connects to a serial port on the Raspberry Pi board. The cable is configured electrically to process and drive +3.3 V logic level UART signals. What is the purpose of the cable? This cable provides a simple method to analyse and debug your Raspberry Pi programming. The cable is connected to the Raspberry Pi ARM processor UART receive/transmit and provides detailed information from the Linux kernel to your PC. Cable Signal Description GND; black - Device ground supply pin. Connects to the RPI ground pin TXD; orange - Transmit Asynchronous Data output. Connects to RXD input on RPi board RXD; Yellow - Receive Asynchronous Data input. Connects to TXD output on RPi board TTL-232R-Rpi Key Features Internal EEPROM Lower Operating and Suspend Current Low USB Bandwidth Consumption High Output Drive Option UART Pin Signal Inversion FCC and CE compliant 3.3 V TTL inputs FCC and CE compliant Communication Parameters Speed: 115200 baud Bits: 8 Parity: None Stop Bits: 1 Flow Control: None Application Information FTDI TTL-232R-RPi cable provides USB to TTL Level UART solutions and is customised for operation specific to the Raspberry Pi. The Raspberry Pi Community There is a huge sense of community around Raspberry Pi. The Raspberry Pi site features projects, blogs and downloadable software for you to get stuck into, or even to help spark your ideas. There is also a Forum section where you can discuss topics and ask for help from other Raspberry Pi users. Help Guides and other documentation are available to help you get started on your project. Find all of this information at: https://www.raspberrypi.org/