Features

• UL, CSA (Part number; 762-5788 762-5788 and; 762-5801 762-5801 only)
• In the case of a momentary switch, the transient state is written in parentheses, such as On- (Off).
• Fujisoku push-button switches – SP, SPP and S2P series
• Fujisok SP and SPP; The S2P series push buttons are heavy-duty, rugged panel-mounted switches with high current ratings and a choice of SPST, DPST or DPDT contact configurations and momentary or alternate switching capabilities.
• The SP, SPP, and S2P push-button switches have a threaded bushing size M12 x 1 and include 1 black cap, 1 hex nut, 1 knurled nut, and 1 locking washer (all dual push-button switches are 2 each).
• Suitable for 12.5 mm panel cutouts (For details on cropping, see the table below.) of 4.5 mm, 5.5 mm and 11.5 mm thickness.
• SPP Switch (Part No.; 762-5801 762-5801) is a DPST switch with a rated current of 3 A. The operation is an alternate type of push and pull, where push is off and pull is on.
• The S2P push-button switch (Part number; 762-5681 762-5681 and; 762-5690 762-5690) is a dual push-button switch with a rated current of 10 A and is designed so that both actuators are not pushed simultaneously.
• Standard (SP), push-pull (SPP) or dual push-button (S2P) switches can be selected according to application High rated current solder terminal insulation resistance: & gt; 100 MΩ Electrical Life: 10,000 Times M12 x 1, Screw Attached Bush Accessories: 1 Black Cap, 1 Hex Nut, 1 Knurled Nut, 1 Locking Washer (All dual push-button switches are two)