SpecSpec class="init">

取扱点数300万点

How to use

English China Indonesia Korea Thailand Vietnam

Contact us

すべてのカテゴリ すべてのカテゴリ Lab Instruments & Supplies Factory Work Tools & Supplies Clean Room/Anti Static Supplies Medical, Nursing & Care Products Food Sanitation & Inspection Office Supplies and Stationery Emergency Supplies Education, Learning Supplies Specially Ordered Item

Contact us

Quote Other Requests

• AXEL GLOBAL
• カテゴリ一覧
• Lab Instruments & Supplies
• Electronic/Electrical Parts and Controll Equipments
• Electronics Components, Power & Connectors
• Connectors
• Connector Tools & Accessories
• 63-4964-51 JST WC Ratchet Crimping Tool for Crimp Contact　WC-491

JST

63-4964-51　JST WC Ratchet Crimping Tool for Crimp Contact　WC-491

• 印刷

• PDF

• 

特徴

• JST WC-491 Hand Crimping Tool for SZH Crimp Terminals. Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. JST WC-491 Hand Crimping Tool - Overview. From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This crimp tool consists of two ergonomically designed handles with a soft grip for comfortable use, a ratchet mechanism, precision ground die assembly, locator and wire stop. The die assembly has two cavities for wire sizes 26 AWG and 28 AWG. The pre-set load of the tool can be easily adjusted. Ratchet Mechanism. The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened by pushing a ratchet release lever. Locator and Wire Stop. This hand crimp tool features a user friendly flap style locator which ensures the terminal is accurately positioned during the crimping process. The locator is simply flipped open allowing the terminal to be inserted into the correct profile. Once the terminal is inserted the locator is flipped back into place and the crimp tool is closed until the first ratchet. The pre-stripped wire is then inserted into the terminal until it butts against the wire stop, the hand tool can then be closed until the ratchet releases. The locator is opened and the full crimped terminal can then be carefully removed. Key Features and Benefits. Durable and easy to use Precision ground dies Ratchet mechanism ensures full crimp cycle is achieved Ratchet release latch Locator and wire stop for accurate terminal positioning Easy re-adjustment of load Ergonomically designed soft grip handles for comfortable use. Questions and Answers. What Terminals can this Crimping Tool be used with? This hand crimping tool is designed for crimping JST loose piece SZH-002T-P0.5 un-insulated crimp terminals that accept a wire size range from 28 AWG to 26 AWG onto cable

Spec

• Quantity：1piece
• Series : WC
• Crimp Tool Type : Ratchet
• Overall Length : 193mm
• CODE No.:688-0922
•  

Package size：75×235×40 mm　320 g　 [About Package size]

Order No.

63-4964-51

Model No.Model No. class="init"> 取扱点数300万点 How to use English China Indonesia Korea Thailand Vietnam Contact us すべてのカテゴリ すべてのカテゴリ Lab Instruments & Supplies Factory Work Tools & Supplies Clean Room/Anti Static Supplies Medical, Nursing & Care Products Food Sanitation & Inspection Office Supplies and Stationery Emergency Supplies Education, Learning Supplies Specially Ordered Item Contact us Quote Other Requests AXEL GLOBAL カテゴリ一覧 Lab Instruments & Supplies Electronic/Electrical Parts and Controll Equipments Electronics Components, Power & Connectors Connectors Connector Tools & Accessories 63-4964-51 JST WC Ratchet Crimping Tool for Crimp Contact　WC-491 JST 63-4964-51　JST WC Ratchet Crimping Tool for Crimp Contact　WC-491 印刷 PDF 特徴 JST WC-491 Hand Crimping Tool for SZH Crimp Terminals. Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. JST WC-491 Hand Crimping Tool - Overview. From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This crimp tool consists of two ergonomically designed handles with a soft grip for comfortable use, a ratchet mechanism, precision ground die assembly, locator and wire stop. The die assembly has two cavities for wire sizes 26 AWG and 28 AWG. The pre-set load of the tool can be easily adjusted. Ratchet Mechanism. The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened by pushing a ratchet release lever. Locator and Wire Stop. This hand crimp tool features a user friendly flap style locator which ensures the terminal is accurately positioned during the crimping process. The locator is simply flipped open allowing the terminal to be inserted into the correct profile. Once the terminal is inserted the locator is flipped back into place and the crimp tool is closed until the first ratchet. The pre-stripped wire is then inserted into the terminal until it butts against the wire stop, the hand tool can then be closed until the ratchet releases. The locator is opened and the full crimped terminal can then be carefully removed. Key Features and Benefits. Durable and easy to use Precision ground dies Ratchet mechanism ensures full crimp cycle is achieved Ratchet release latch Locator and wire stop for accurate terminal positioning Easy re-adjustment of load Ergonomically designed soft grip handles for comfortable use. Questions and Answers. What Terminals can this Crimping Tool be used with? This hand crimping tool is designed for crimping JST loose piece SZH-002T-P0.5 un-insulated crimp terminals that accept a wire size range from 28 AWG to 26 AWG onto cable 仕様 Quantity：1piece Series : WC Crimp Tool Type : Ratchet Overall Length : 193mm CODE No.:688-0922   荷姿サイズ：75×235×40 mm　320 g　 [荷姿サイズについて] アズワン品番 63-4964-51 型番 WC-491 Standard price JPY: 88,400 USD: 554.13 Excange rate 1USD= 159.53JPY Valid price in Japan Quantity 1piece Stock in JapanASONEs="init"> Listed products : 3 milion products How to use English China Indonesia Korea Thailand Vietnam Contact us All Categories All Categories Lab Instruments & Supplies Factory Work Tools & Supplies Clean Room/Anti Static Supplies Medical, Nursing & Care Products Food Sanitation & Inspection Office Supplies and Stationery Emergency Supplies Education, Learning Supplies Specially Ordered Item Contact us Quote Other Requests AXEL GLOBAL Categories Lab Instruments & Supplies Electronic/Electrical Parts and Controll Equipments Electronics Components, Power & Connectors Connectors Connector Tools & Accessories 63-4964-51 JST WC Ratchet Crimping Tool for Crimp Contact　WC-491 JST 63-4964-51　JST WC Ratchet Crimping Tool for Crimp Contact　WC-491 Print PDF Features JST WC-491 Hand Crimping Tool for SZH Crimp Terminals. Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. JST WC-491 Hand Crimping Tool - Overview. From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This crimp tool consists of two ergonomically designed handles with a soft grip for comfortable use, a ratchet mechanism, precision ground die assembly, locator and wire stop. The die assembly has two cavities for wire sizes 26 AWG and 28 AWG. The pre-set load of the tool can be easily adjusted. Ratchet Mechanism. The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps. If jamming or terminal misplacement occurs the handles can be easily opened by pushing a ratchet release lever. Locator and Wire Stop. This hand crimp tool features a user friendly flap style locator which ensures the terminal is accurately positioned during the crimping process. The locator is simply flipped open allowing the terminal to be inserted into the correct profile. Once the terminal is inserted the locator is flipped back into place and the crimp tool is closed until the first ratchet. The pre-stripped wire is then inserted into the terminal until it butts against the wire stop, the hand tool can then be closed until the ratchet releases. The locator is opened and the full crimped terminal can then be carefully removed. Key Features and Benefits. Durable and easy to use Precision ground dies Ratchet mechanism ensures full crimp cycle is achieved Ratchet release latch Locator and wire stop for accurate terminal positioning Easy re-adjustment of load Ergonomically designed soft grip handles for comfortable use. Questions and Answers. What Terminals can this Crimping Tool be used with? This hand crimping tool is designed for crimping JST loose piece SZH-002T-P0.5 un-insulated crimp terminals that accept a wire size range from 28 AWG to 26 AWG onto cable Spec Quantity：1piece Series : WC Crimp Tool Type : Ratchet Overall Length : 193mm CODE No.:688-0922   Package size：75×235×40 mm　320 g　 [About Package size] Order No. 63-4964-51 Model No. WC-491 Standard price JPY: 88,400 USD: 554.13 Excange rate 1USD= 159.53JPY Valid price in Japan Quantity 1piece Stock in Japan Supplier Stock Quote Other Requests This page is the page of JST WC Ratchet Crimping Tool for Crimp Contact sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.