ELECOM CO., LTD

63-4210-35　［Discontinued］11 ac Small Radio Access Point for Business　WAB-S733MI

Features

Equipped with a wireless slave mode, this 11ac compact wireless access point for corporate users can be easily connected wirelessly to devices that only have wired ports, such as multi-function printers, POS terminals and FA devices.
Supports simultaneous 11ac and 2.4/5 GHz communications in access point router mode, allowing connections from older to newer terminals.
It is small and lightweight (about 90 g) and can be easily installed in any place where a wired LAN is already installed, such as a hotel room or an office meeting room. You can set up a Wi-Fi environment without any trouble.
It also supports the wireless separator function, which prohibits connections between connected devices, and ensures security when hotels are introduced.
Special screws and double-sided tape are attached as standard for various installations. It can also be used to prevent theft and pranks at hotels and to attach directly to equipment.
It comes with a "SSID information sticker" that easily identifies the SSID and password with a two-dimensional bar code. Supports smooth initial setup.
You can configure authentication and encryption methods for each SSID to enable a single wireless access point to manage up to 5 SSIDs each at 2.4/5 GHz for multiple SSIDs and to enable a variety of security policies.
Support for WAB-MAT, a dedicated management software that allows users to change settings and check the operating status of wireless access points in a single operation. (Supported only in access point mode) Contributes to a significant reduction in management man-hours.
The use of a built-in antenna with an elaborate position ensures that the antenna does not interfere with wall installation and does not affect communication distance. In addition, compared with the antenna external type, communication failure due to antenna damage is also prevented.
A long-term 3-year warranty that gives you peace of mind for corporate use. We also offer optional extension and delivery maintenance.

Spec

Wireless LAN Department
Compliant standards (standards International): IEEE 802.11 ac/n/a, IEEE 802.11 n/g/b
Compliant standards (Domestic standards): ARIB STD-T 66, ARIB STD-T 71
Frequency range (center frequency): 2.4 GHz band: 2,400 to 2,484 MHz 5.2 GHz band (W 52): 5,150 to 5,250 MHz 5.3 GHz band (W 53): 5,250 to 5,350 MHz 5.6 GHz band (W 56): 5,470 to 5,725 MHz
Channel: 2.4 GHz band: 1 to 13 ch 5 GHz band (W 52/W 53/W 56): 36, 40, 44, 48, 52, 56, 60, 64,100,104,108,112,116,120,124,128,132,136,140 ch
Modulation/demodulation method: IEEE 802.11 ac/n: MIMO-OFDM, IEEE 802.11 a/g: OFDM, IEEE 802.11 b: DS-SS
Communication type: 2.4 GHz and 5 GHz simultaneous communication
Antenna: Internal Antenna 2 pieces (1 dedicated 2.4 GHz, 1 shared 2.4 GHz/5 GHz)
Data rates (specification value): IEEE 802.11 ac: up to 433 Mbps; IEEE 802.11 n (2.4 GHz): up to 300 Mbps; IEEE 802.11 n (5 GHz): up to 150 Mbps; IEEE 802.11 a/g: up to 54 Mbps; IEEE 802.11 b: up to 11 Mbps
Antenna power: 10 mW/MHz or less
20 connections (2.4 GHz : 10 ; 5 GHz : 10) ; 10 or fewer recommended (Total 2.4 GHz and 5 GHz)
authentication methods: open system authentication, WPA2 (Personal)
Encryption method: WPA/WPA2: AES, TKIP, WEP
MAC address filtering: 128 (2.4 GHz : 64 pieces ; 5 GHz : 64 pieces)
Other security features: SSID hiding, STA separator, SSID separator
Other Support Functions: Radio Output Adjustment
Wired LAN Department
Compliant standards: IEEE 802.3 10 BASE-T, IEEE 802.3 u 100 BASE-TX
Ports: 1 RJ- 45 type 8-pole connector auto-negotiation/Auto MDI/MDI-X capable
WAN side configuration: DHCP/static IP/PPPoE (In Router Mode)
LAN side setting: Obtained/fixed IP from DHCP in access point mode, DHCP server/fixed IP in router mode
Mounting operation mode: Access point mode (initial value)/Router mode/sub unit mode
Support Features
multi-SSID: maximum 10 pieces (2.4 GHz : 5 pieces ; 5 GHz : 5 pieces)
tagged VLANs (IEE 802.1 Q): maximum 10 pieces (2.4 GHz : 5 pieces ; 5 GHz : 5 pieces)
QoS: bandwidth control
management function
Management Protocol: SNMP v1/v2c/v3
Other: Web UI, logging, backing up and restoring configuration files, firmware updates, NTP clients, WAB-MAT support (chisel support in access point mode)
Clients (when wireless is connected): Windows 10/8. 1/7 (SP1 or later) (32 bit/64 bit), macOS 10.14/10.13/10.12, Mac OS X 10.11/10.10/10.9, Android 4.4 or later, iOS 10.0 or later
Supported browsers (WebUI Configuration Time): Internet Explorer 11, Microsoft Edge, Chrome Ver. 23.0 or later, Firefox Ver. 17 or later, Safari Ver. 5 or later.
standards
EMI standards - VCCI Class B
Safety standards Compliant: IEC 61000 -4
Technical standards based on the Radio Law: TELEC
Environmental standards: EU RoHS Directive compliant
LED
PWR: On (green): power supply on, blinking (green): Firmware update in progress
2.4 GHz : On ( green ) : 2.4 GHz band enabled Off : 2.4 GHz band disabled Blink ( green ) : The product is communicating with a wireless sub unit in the 2.4 GHz band (In sub unit mode)
5 GHz: On (green): 5 GHz band enabled Off: 5 GHz band disabled Blink (green): The product is communicating with the Radio sub unit in the 5 GHz band (In sub unit mode)
power supply Input Voltage/Power Consumption: 5 VDC, 1.5 A (microB), Approx. 5.8 W
environmental condition
Operating Temperature: 0 to 40 ° C
Operating Humidity: 0 to 90% (No condensation)
Storage Temperature: -20 to 60 ° C

Package size：114×169×50 mm　270 g　 [About Package size]

Order No.	63-4210-35
Model No.	WAB-S733MI
JAN Code	4953103374423
Standard price	JPY: 8,980 USD: 56.29 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece

Stock in Japan	-