Spec

• Actuator pin Push Button Type
• action type general form
• Action Method Slow Action
• switch mechanism self-return mechanism
• switching timing non-cutting type
• contact type single pole double throw
• Contact Configuration 1c
• Stand-alone terminal for terminal specification printed circuit boards
• small load
• rating Current 0.1 A
• open and close ability (DC)/non-inductive load rated voltage : DC 30 V/resistive load : 0.1 S (NC) 0.1 A (NO)
• When using the ambient temperature range: -10 to + 80 ° C
• When using the ambient humidity range: 85 %RH or less
• Allowable operating speed 1 mm/s to 0.5 m/s
• Allowable operating frequency (mechanical) 200 times/min or less
• Allowable operating frequency (Electrical) 30 times/min or less
• Contact resistance: 50 mΩ (initial value). free position FP, operation limit position TTP)
• insulation resistance between terminals of the same electrode: 100 Mω or more
• Between charged metal and ground: 250 V or more
• (50/60 Hz 1 min with separator)
• Mechanical Durability 50,000 times or more
• Electrical durability 50,000 times or more (rating load)
• Vibration resistance (malfunction) At the free position and the operation limit position, 10 to 55 Hz sub amplitude 1.5 mm vibration period 3 to 5 minutes is applied in X, Y and Z directions for each 10 minutes, and malfunction is within 1 ms.
• Maximum 1,000 m/s * * 2 shocks (durability) are applied 10 times in the X, Y and Z directions at the free position and the operating limit position, and no abnormalities are found electrically and mechanically.
• Maximum 300 m/s * * 2 shocks are applied 3 times each (malfunction) in the X, Y and Z directions at the specified free position and the specified operating limit position, causing a malfunction of up to 1 ms.
• protective structure general form
• IEC 60529 standards (JEM standards ): IP00
• Electric Shock Protection Class III
• mounting screw mounting
• Mass house: 0.3 g
• Force required for movement (OF) specification value up to 0.49 N
• Resilience (rf) specification value min. 0.05 N
• Free position (FP) specification value max. 9.5 mm
• Operating position (OP) OP1: specification value 7.8 to 8.4 mm
• OP2: specification value 7.1 to 7.7 mm
• Operating limit position (TTP) specification value : 6.3 to 6.7 mm
•