63-3101-94 Pin Socket for 16 Pin Board (8 Pins x 2 rows) 21602X8GSE
FeaturesFeatures class="init">
63-3101-94 Pin Socket for 16 Pin Board (8 Pins x 2 rows) 21602X8GSE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Linkman
63-3101-94 Pin Socket for 16 Pin Board (8 Pins x 2 rows) 21602X8GSE
-
特徴
- 2.54 mm (0.1inch) pitch pin socket 2 rows x8 pins =16 pins. It is not compatible with standard 0.64 mm square square pin headers and with round pin sockets and IC sockets even at the same pitch. It is the most common connector for connecting boards directly to each other without using cables, and is used for various boards such as Arduino and Raspberry Pi. The number of pins in the photo may be different from the product, so please check the number of rows and the number of pins. There is also a low height type. This product is a standard type socket with no pin protrusion more than the cost of solder, but there is also a long type of pin used for multi-layer expansion boards such as Arduino shields. (There are further differences in the length of the long pins.). Please be careful. ) *Solder all pins before use. If only a few pins are soldered and connected to the pin header, the socket housing may stick to the pin header side and disassemble the socket when it is removed.
Spec
- Connector shape: pin socket
- Number of pins: 2 rows of 16 pins (2 x 8 pins)
- Socket Height: 8.42 mm
- Pitch: 2.54 mm
- Rated voltage: 500 VDC
- Current rating: 1.0 A
- Terminal processing: -
- Operating temperature range: -55 degrees C to + 105 degrees C
- Number of pieces: 1
-
Order No.
63-3101-94
Model No.
21602X8GSE
JAN Code
4547634209677
Standard price
JPY: 200
USD: 1.24
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
63-3101-94 Pin Socket for 16 Pin Board (8 Pins x 2 rows) 21602X8GSE
特徴
- 2.54 mm (0.1inch) pitch pin socket 2 rows x8 pins =16 pins. It is not compatible with standard 0.64 mm square square pin headers and with round pin sockets and IC sockets even at the same pitch. It is the most common connector for connecting boards directly to each other without using cables, and is used for various boards such as Arduino and Raspberry Pi. The number of pins in the photo may be different from the product, so please check the number of rows and the number of pins. There is also a low height type. This product is a standard type socket with no pin protrusion more than the cost of solder, but there is also a long type of pin used for multi-layer expansion boards such as Arduino shields. (There are further differences in the length of the long pins.). Please be careful. ) *Solder all pins before use. If only a few pins are soldered and connected to the pin header, the socket housing may stick to the pin header side and disassemble the socket when it is removed.
Spec
- Connector shape: pin socket
- Number of pins: 2 rows of 16 pins (2 x 8 pins)
- Socket Height: 8.42 mm
- Pitch: 2.54 mm
- Rated voltage: 500 VDC
- Current rating: 1.0 A
- Terminal processing: -
- Operating temperature range: -55 degrees C to + 105 degrees C
- Number of pieces: 1
| Order No. | 63-3101-94 | |
|---|---|---|
| Model No. | 21602X8GSE | |
| JAN Code | 4547634209677 | |
| Standard price |
JPY: 200
USD: 1.24
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|