VESSEL CO., INC.

63-2009-16　［Discontinued］High Power Ionizer Gun　HPG-1S

Features

For work pieces with a large amount of charge.
The discharge needle (discharge electrode) uses titanium with minimal wear and tear to provide long-term stable performance.
Up to two guns can be used simultaneously on a single power source.
High pressure cables use high pressure shielded cables with low external noise impact.
The body of the air gun is made of solid aluminum die gust, and it is a large lever with excellent workability and easy to pull.
Prepainting rooms, de-energizing after molding, de-energizing pellets, etc.

Spec

Air pressure (MPa): MAX 0.7
power cord length (m): 1.8 m
Noise level (dBA): approx. 95 (0.3 MPa)
Discharge time: about 0.5 seconds (0.3 MPa, 150 mm)
Discharge system: AC corona discharge system
Operating ambient temperature (° C): 0 to 40 ° C (However, there shall be no condensation and freezing.)
Operating ambient humidity (%): 10 to 90% RH (No freezing or condensation)
power cord length (m): 1.8 m
RoHS Compliant
Type: high voltage impression type static eliminator
Applied voltage/frequency: AC 3.5 kV/50/60 Hz (GP -1 4 Sets/adjusts on the kV side.)
Installation distance (HPG -1): 50 mm to 300 mm
Ion balance can be adjusted on the GP -1 side (Charge plate monitor or equivalent is required.)
Location: Indoor
Protection circuit (HPG -1): High voltage power supply unit GP -1 4 high voltage with kV fault detection/automatic stop circuit
Air connection: φ8 mm tube, one-touch fitting
Air consumption: approx. 100 L/min, input air pressure: 0.3 MPa
The expected life of the device (: 10,000 hours is a guideline). (8 hours x 250 days x 5 years)
rating input Voltage: DC24V ± 10%
Output Variable Range Unloaded (rms): AC output 4 kV/DC output -150 to + 550 V
Secondary short-circuit current: 5 mA or less
Output monitor: 1/1000 V of the output voltage ± 5% is output to the monitor terminal.
material/Finishing: Gunbody: aluminum die-cast, Discharge needle: titanium, Nozzle body: plastic (ABS Plastic), Nozzle tip: stainless steel (SUS304), GP -1 4KV: enclosure SPCC, white coating
Comprises: 1 high-power gun (HPG -1), 1 high voltage unit (GP -1 4KV) and 1 power supply adaptor (AD -24 GP): 1 piece, 1 AC input cord and 1 instruction manual.
Country of origin: Japan
Code Number: 855 -2070

Package size：220×264×205 mm　5.06 kg　 [About Package size]

Order No.	63-2009-16
Model No.	HPG-1S
JAN Code	4907587019301
Standard price	JPY: 130,000 USD: 814.89 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1set

Stock in Japan	-