63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001
FeaturesFeatures class="init">
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Wakisangyo Co., Ltd.
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001
-
-
-
-
-
-
-
-
-
-
特徴
- Just stick it on the corner and insert it into the entire gap!
- Corner and full support!
- The W effect makes furniture resistant to shaking!
- Clean and easy installation
- By attaching corner plates to both ends of the whole surface of the furniture and inserting the fall prevention stabilizer into the gap in the front, the center of gravity of the furniture moves to the back and makes it difficult to fall.
- The corner plate has double-sided tape and anti-slip sheet (EVA resin), and the anti-fall stabilizer has a structure that prevents it from coming off the surface, so it is hard to come off even when shaking due to an earthquake, and firmly supports furniture.
- Since it is made of light brown elastomer resin that does not stand out when mounted, it can be mounted neatly and cleanly and absorbs weak vibration.
- Since it does not use nails or screws, it does not damage furniture, pillars, floor surfaces, and soldering.
- The fall prevention stabilizer attached to the whole surface of the furniture can be easily cut with scissors or cutters, and the length can be freely adjusted according to the size of the furniture.
- The corner installation plate is made of shock-resistant ABS resin (EVA resin that absorbs vibration moderately without color transfer on the bottom), and the fall prevention stabilizer is made of olefin elastomer resin that does not emit toxic gas even when incinerated.
- *Please note that this product is designed to reduce the shaking and impact caused by an earthquake, and does not compensate for damage caused by all disasters or accidents.
- For preventing furniture from falling down during earthquakes.
- It cannot be used where there is no wall behind the furniture.
- Cannot be used on extremely uneven or cushioned floors.
- Cannot be used for furniture with legs.
- Do not use this product on furniture with 2 tiers. The upper furniture will fall over.
- When this product is installed, the furniture will be slanted, so it cannot be used in combination with a fall prevention device that can pull the ceiling and furniture.
- It does not prevent falling by riding on the drawers or the top of the furniture.
- This product uses double-sided tape that can be removed cleanly. However, please note that if you attach this product to furniture whose surface is made of soft materials such as decorative plywood, the surface may be damaged when you remove it.
- Do not use for anything other than the intended purpose.
- It is effective to use on a solid surface such as a wooden floor.
- (Effect may differ with flooring materials such as tatami mats and carpets.)
Spec
- Furniture Fall Prevention Stabilizer Size (cm): 110
- corner installation plate
- Width (mm): 65
- Corner Mounting Plate Depth (mm): 40
- Color: Light brown
- Material: Corner Plate, Body/ABS Resin, Furniture Surface Sheet/EVA Resin, Floor Surface Sheet/EVA Resin, Adhesive/Acrylic
-
Package sizePackage sizes="init">
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Wakisangyo Co., Ltd.
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001
-
-
-
-
-
-
-
-
-
-
特徴
- Just stick it on the corner and insert it into the entire gap!
- Corner and full support!
- The W effect makes furniture resistant to shaking!
- Clean and easy installation
- By attaching corner plates to both ends of the whole surface of the furniture and inserting the fall prevention stabilizer into the gap in the front, the center of gravity of the furniture moves to the back and makes it difficult to fall.
- The corner plate has double-sided tape and anti-slip sheet (EVA resin), and the anti-fall stabilizer has a structure that prevents it from coming off the surface, so it is hard to come off even when shaking due to an earthquake, and firmly supports furniture.
- Since it is made of light brown elastomer resin that does not stand out when mounted, it can be mounted neatly and cleanly and absorbs weak vibration.
- Since it does not use nails or screws, it does not damage furniture, pillars, floor surfaces, and soldering.
- The fall prevention stabilizer attached to the whole surface of the furniture can be easily cut with scissors or cutters, and the length can be freely adjusted according to the size of the furniture.
- The corner installation plate is made of shock-resistant ABS resin (EVA resin that absorbs vibration moderately without color transfer on the bottom), and the fall prevention stabilizer is made of olefin elastomer resin that does not emit toxic gas even when incinerated.
- *Please note that this product is designed to reduce the shaking and impact caused by an earthquake, and does not compensate for damage caused by all disasters or accidents.
- For preventing furniture from falling down during earthquakes.
- It cannot be used where there is no wall behind the furniture.
- Cannot be used on extremely uneven or cushioned floors.
- Cannot be used for furniture with legs.
- Do not use this product on furniture with 2 tiers. The upper furniture will fall over.
- When this product is installed, the furniture will be slanted, so it cannot be used in combination with a fall prevention device that can pull the ceiling and furniture.
- It does not prevent falling by riding on the drawers or the top of the furniture.
- This product uses double-sided tape that can be removed cleanly. However, please note that if you attach this product to furniture whose surface is made of soft materials such as decorative plywood, the surface may be damaged when you remove it.
- Do not use for anything other than the intended purpose.
- It is effective to use on a solid surface such as a wooden floor.
- (Effect may differ with flooring materials such as tatami mats and carpets.)
仕様
- Furniture Fall Prevention Stabilizer Size (cm): 110
- corner installation plate
- Width (mm): 65
- Corner Mounting Plate Depth (mm): 40
- Color: Light brown
- Material: Corner Plate, Body/ABS Resin, Furniture Surface Sheet/EVA Resin, Floor Surface Sheet/EVA Resin, Adhesive/Acrylic
-
荷姿サイズ：190×42×220 mm 200 g
[About Package size]
アズワン品番
63-1525-45
型番
TSS-001
JAN Code
4903757271234
Standard price
JPY: 1,590
USD: 9.89
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1set
Stock in Japan
Supplier Stock
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001
特徴
- Just stick it on the corner and insert it into the entire gap!
- Corner and full support!
- The W effect makes furniture resistant to shaking!
- Clean and easy installation
- By attaching corner plates to both ends of the whole surface of the furniture and inserting the fall prevention stabilizer into the gap in the front, the center of gravity of the furniture moves to the back and makes it difficult to fall.
- The corner plate has double-sided tape and anti-slip sheet (EVA resin), and the anti-fall stabilizer has a structure that prevents it from coming off the surface, so it is hard to come off even when shaking due to an earthquake, and firmly supports furniture.
- Since it is made of light brown elastomer resin that does not stand out when mounted, it can be mounted neatly and cleanly and absorbs weak vibration.
- Since it does not use nails or screws, it does not damage furniture, pillars, floor surfaces, and soldering.
- The fall prevention stabilizer attached to the whole surface of the furniture can be easily cut with scissors or cutters, and the length can be freely adjusted according to the size of the furniture.
- The corner installation plate is made of shock-resistant ABS resin (EVA resin that absorbs vibration moderately without color transfer on the bottom), and the fall prevention stabilizer is made of olefin elastomer resin that does not emit toxic gas even when incinerated.
- *Please note that this product is designed to reduce the shaking and impact caused by an earthquake, and does not compensate for damage caused by all disasters or accidents.
- For preventing furniture from falling down during earthquakes.
- It cannot be used where there is no wall behind the furniture.
- Cannot be used on extremely uneven or cushioned floors.
- Cannot be used for furniture with legs.
- Do not use this product on furniture with 2 tiers. The upper furniture will fall over.
- When this product is installed, the furniture will be slanted, so it cannot be used in combination with a fall prevention device that can pull the ceiling and furniture.
- It does not prevent falling by riding on the drawers or the top of the furniture.
- This product uses double-sided tape that can be removed cleanly. However, please note that if you attach this product to furniture whose surface is made of soft materials such as decorative plywood, the surface may be damaged when you remove it.
- Do not use for anything other than the intended purpose.
- It is effective to use on a solid surface such as a wooden floor.
- (Effect may differ with flooring materials such as tatami mats and carpets.)
Spec
- Furniture Fall Prevention Stabilizer Size (cm): 110
- corner installation plate
- Width (mm): 65
- Corner Mounting Plate Depth (mm): 40
- Color: Light brown
- Material: Corner Plate, Body/ABS Resin, Furniture Surface Sheet/EVA Resin, Floor Surface Sheet/EVA Resin, Adhesive/Acrylic
Package sizePackage sizes="init">
63-1525-45 Furniture Fall Prevention Set Just by Laying TSS-001
特徴
- Just stick it on the corner and insert it into the entire gap!
- Corner and full support!
- The W effect makes furniture resistant to shaking!
- Clean and easy installation
- By attaching corner plates to both ends of the whole surface of the furniture and inserting the fall prevention stabilizer into the gap in the front, the center of gravity of the furniture moves to the back and makes it difficult to fall.
- The corner plate has double-sided tape and anti-slip sheet (EVA resin), and the anti-fall stabilizer has a structure that prevents it from coming off the surface, so it is hard to come off even when shaking due to an earthquake, and firmly supports furniture.
- Since it is made of light brown elastomer resin that does not stand out when mounted, it can be mounted neatly and cleanly and absorbs weak vibration.
- Since it does not use nails or screws, it does not damage furniture, pillars, floor surfaces, and soldering.
- The fall prevention stabilizer attached to the whole surface of the furniture can be easily cut with scissors or cutters, and the length can be freely adjusted according to the size of the furniture.
- The corner installation plate is made of shock-resistant ABS resin (EVA resin that absorbs vibration moderately without color transfer on the bottom), and the fall prevention stabilizer is made of olefin elastomer resin that does not emit toxic gas even when incinerated.
- *Please note that this product is designed to reduce the shaking and impact caused by an earthquake, and does not compensate for damage caused by all disasters or accidents.
- For preventing furniture from falling down during earthquakes.
- It cannot be used where there is no wall behind the furniture.
- Cannot be used on extremely uneven or cushioned floors.
- Cannot be used for furniture with legs.
- Do not use this product on furniture with 2 tiers. The upper furniture will fall over.
- When this product is installed, the furniture will be slanted, so it cannot be used in combination with a fall prevention device that can pull the ceiling and furniture.
- It does not prevent falling by riding on the drawers or the top of the furniture.
- This product uses double-sided tape that can be removed cleanly. However, please note that if you attach this product to furniture whose surface is made of soft materials such as decorative plywood, the surface may be damaged when you remove it.
- Do not use for anything other than the intended purpose.
- It is effective to use on a solid surface such as a wooden floor.
- (Effect may differ with flooring materials such as tatami mats and carpets.)
仕様
- Furniture Fall Prevention Stabilizer Size (cm): 110
- corner installation plate
- Width (mm): 65
- Corner Mounting Plate Depth (mm): 40
- Color: Light brown
- Material: Corner Plate, Body/ABS Resin, Furniture Surface Sheet/EVA Resin, Floor Surface Sheet/EVA Resin, Adhesive/Acrylic
荷姿サイズ：190×42×220 mm 200 g [About Package size]
| アズワン品番 | 63-1525-45 | |
|---|---|---|
| 型番 | TSS-001 | |
| JAN Code | 4903757271234 | |
| Standard price |
JPY: 1,590
USD: 9.89
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1set | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|