62-8998-89 Rolling Sliding Screw With PPS Nut φ4XL1X100L RFSR41-100
Features
- The resin nuts for rolling sliding screws are made of PPS as a base material, and special resin added with solid lubricants (such as fluororesin) is used to improve the sliding characteristics.
- Compared to polypropylene nylon polyacetal, this material has superior sliding, heat resistance and water absorption.
- Compared to ball screws, it is less noisy and slides more lightly with less torque than table screws.
- Compared to ball screws, it is less noisy and slides more lightly with less torque than trapezoidal screws.
Spec
- Nominal Diameter D1 (mm): 4
- Lead (mm): 1
- Length (mm): 100
- Initial lead error ±0.21 / 300mm (Base temperature 25 °C)
- bending accuracy within 0.16mm
- Material / Finish: Screw shaft: Stainless steel SUS304, nuts: Sliding PPS resin
- Set Contents / Accessories: 1 PPS nut
- Quantity: 1
- Code number: 856 -7042
- * The position reproducibility changes due to the use of friction or maintenance of parts during maintenance.
- * If grease is used, grease in "molybdenum system" and "silicon system" cannot be used.
- * Please do not use it because the nut will interfere.
- * The sliding characteristics are based on the temperature of 25 °C. The characteristics may change depending on the temperature difference.
- * Because the nut is a PPS base material, it can be cracked or deformed by shock or excessive tightening.
Package size：100×23×15 mm [About Package size]
| Order No. | 62-8998-89 | |
|---|---|---|
| Model No. | RFSR41-100 | |
| Standard price |
JPY: 2,170
USD: 13.50
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|