62-6178-25 Poly Cap TF75 (0.1 μm) 6700-7501
Features
- Solvent resistance with PTFE filters
- Recommended for organic solvents and erosive solutions
- Capsule type filters with the smallest pore size (5 types of 0.05, 0.1, 0.2, 0.45, 1.0 μm)
- Sterilization with autoclave or ethylene oxide gas is possible. Integrity testing is possible.
- Note)Only for test and research purposes.
Spec
- Housing: Polypropylene
- Membrane Material: Polytetrafluoroethylene
- vents: inlet side
- Support System: Polypropylene
- Connection Method: Heat Crimping
- Voltage: 0.41 MPa (60psi)
- Filtration direction: with bidirectional support. Only one direction depending on the application due to venting. Reverse filtration is possible only at low pressure.
- Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but use at the user's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
- Effective Filtration Area: 1,000 cm2
- IPA Bubble Point: > 0.17 MPa (25psi)
- Pore Diameter (μm): 0.1
- Connection Inlet: SB
- Connection outlet: SB
- SB= Stepped Hose Port: Can be connected to 6~10 mm (1/4”-3/8”) tubing
Package size：70×70×174 mm 160 g [About Package size]
| Order No. | 62-6178-25 | |
|---|---|---|
| Model No. | 6700-7501 | |
| Standard price |
JPY: 20,200
USD: 126.71
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|