OMRON Corporation

62-4140-48　［Discontinued］Inverter　3G3MX2-AB007-V1

Products Information

Features

Strong in positioning and speed control. Inverter for machine control with attention to response time
AmazinginControl
High starting torque and fast response contribute to machine performance.
The optional unit is installed to support major open networks.
Torquemaster
The MX2 Series V1 type provides 200% starting torque in near-stationary (0.5 Hz) conditions and can operate with torque control in open-loop mode. This provides smooth and quick load control.
Easynetworkintegration
Supports EtherCAT, CompoNet, and DeviceNet in open networks (when a communication unit is installed). With high-speed EtherCAT, Omron's Sysmac series provides a machine-wide solution from input to output.
Easycommunicationssetting
Built-in RS-485 port with Modbus-RTU function as standard. For CP1H/L and CJ series PLC, FB is also available for convenient control of MX2 series V1 type via Modbus-RTU.
The MX2 series V1 type that supports ISO13849-1 (Safety Category 3/PLd) has 2 safety inputs and 1 EDM (Safety Monitor) output.
Since the motor does not require an external contactor, wiring is easy.
Safetyembedded; ISO13849-1, cat3 • Eliminates the need for a motor stop contactor and can be safely combined with Omron's safety controller.
Support for ISO13849-1 (safety category 3/PLd) and IEC60204-1StopCategory0.
MOTORCONTROLPermanentmagnetmotors
The PM motor can be controlled in compliance with high-efficiency motor regulations. By using PM motors, we will further promote energy saving and realize earth-friendly machine control.
Positionandrun!
The inverter is equipped with a position control function. The MX2 series V1 type is ideal for machines that require simple position control, with new functions such as "repositioning," "position data storage at power-off," and "current position preset."
Speedsynchronisation
Pulse train input function is installed as standard, and V/f control is realized with PG signal feedback. Speed feedback enables stable speed control with high accuracy.
Positioningfunctionality
Allows simple position control without an external controller. Position and origin up to 8 points can be set. You can also switch between speed control and simple position control.
Programandplay!
With the MX2 Series V1 type, you can create smart solutions using the built-in simple sequence function. 1 Task A program of up to 1000 lines can be created, and 5 tasks can be processed in parallel.
Freetoprogram
Inverter programming allows you to create the most appropriate program for your machine. You can run up to 1000 lines of code and 5 tasks concurrently. By offering two programming languages, you have more options. (Support for CX-DriveVer. 2.80 or later)

Spec

Single phase 200 VAC 0.75 kw

Order No. 62-4140-48

Model No. 3G3MX2-AB007-V1

JAN Code 4549734696838

Standard price

JPY: 117,000 USD: 733.91

Excange rate 1USD= 159.42JPY
Valid price in Japan

QuantityQuantityass="init"> ［Discontinued］Inverter　3G3MX2-AB007-V1 62-4140-48 【AXEL GLOBAL】 アズワン

取扱点数300万点

How to use

Quote Other Requests

OMRON Corporation

62-4140-48　［Discontinued］Inverter　3G3MX2-AB007-V1

印刷

メーカー商品情報

特徴

Strong in positioning and speed control. Inverter for machine control with attention to response time
AmazinginControl
High starting torque and fast response contribute to machine performance.
The optional unit is installed to support major open networks.
Torquemaster
The MX2 Series V1 type provides 200% starting torque in near-stationary (0.5 Hz) conditions and can operate with torque control in open-loop mode. This provides smooth and quick load control.
Easynetworkintegration
Supports EtherCAT, CompoNet, and DeviceNet in open networks (when a communication unit is installed). With high-speed EtherCAT, Omron's Sysmac series provides a machine-wide solution from input to output.
Easycommunicationssetting
Built-in RS-485 port with Modbus-RTU function as standard. For CP1H/L and CJ series PLC, FB is also available for convenient control of MX2 series V1 type via Modbus-RTU.
The MX2 series V1 type that supports ISO13849-1 (Safety Category 3/PLd) has 2 safety inputs and 1 EDM (Safety Monitor) output.
Since the motor does not require an external contactor, wiring is easy.
Safetyembedded; ISO13849-1, cat3 • Eliminates the need for a motor stop contactor and can be safely combined with Omron's safety controller.
Support for ISO13849-1 (safety category 3/PLd) and IEC60204-1StopCategory0.
MOTORCONTROLPermanentmagnetmotors
The PM motor can be controlled in compliance with high-efficiency motor regulations. By using PM motors, we will further promote energy saving and realize earth-friendly machine control.
Positionandrun!
The inverter is equipped with a position control function. The MX2 series V1 type is ideal for machines that require simple position control, with new functions such as "repositioning," "position data storage at power-off," and "current position preset."
Speedsynchronisation
Pulse train input function is installed as standard, and V/f control is realized with PG signal feedback. Speed feedback enables stable speed control with high accuracy.
Positioningfunctionality
Allows simple position control without an external controller. Position and origin up to 8 points can be set. You can also switch between speed control and simple position control.
Programandplay!
With the MX2 Series V1 type, you can create smart solutions using the built-in simple sequence function. 1 Task A program of up to 1000 lines can be created, and 5 tasks can be processed in parallel.
Freetoprogram
Inverter programming allows you to create the most appropriate program for your machine. You can run up to 1000 lines of code and 5 tasks concurrently. By offering two programming languages, you have more options. (Support for CX-DriveVer. 2.80 or later)

仕様

Single phase 200 VAC 0.75 kw

アズワン品番	62-4140-48
型番	3G3MX2-AB007-V1
JANコード	4549734696838
標準価格	JPY: 117,000 USD: 733.91 Excange rate 1USD= 159.42JPY Valid price in Japan
入り数	1piece

在庫数	-

[$1]［Discontinued］Inverter[/$1]

Explore AXEL

How to use

Get to Know Us

Let Us Help YouASONEs="init"> ［Discontinued］Inverter　3G3MX2-AB007-V1 62-4140-48 【AXEL GLOBAL】 アズワン

Listed products : 3 milion products

How to use

Quote Other Requests

OMRON Corporation

62-4140-48　［Discontinued］Inverter　3G3MX2-AB007-V1

Products Information

Features

Strong in positioning and speed control. Inverter for machine control with attention to response time
AmazinginControl
High starting torque and fast response contribute to machine performance.
The optional unit is installed to support major open networks.
Torquemaster
The MX2 Series V1 type provides 200% starting torque in near-stationary (0.5 Hz) conditions and can operate with torque control in open-loop mode. This provides smooth and quick load control.
Easynetworkintegration
Supports EtherCAT, CompoNet, and DeviceNet in open networks (when a communication unit is installed). With high-speed EtherCAT, Omron's Sysmac series provides a machine-wide solution from input to output.
Easycommunicationssetting
Built-in RS-485 port with Modbus-RTU function as standard. For CP1H/L and CJ series PLC, FB is also available for convenient control of MX2 series V1 type via Modbus-RTU.
The MX2 series V1 type that supports ISO13849-1 (Safety Category 3/PLd) has 2 safety inputs and 1 EDM (Safety Monitor) output.
Since the motor does not require an external contactor, wiring is easy.
Safetyembedded; ISO13849-1, cat3 • Eliminates the need for a motor stop contactor and can be safely combined with Omron's safety controller.
Support for ISO13849-1 (safety category 3/PLd) and IEC60204-1StopCategory0.
MOTORCONTROLPermanentmagnetmotors
The PM motor can be controlled in compliance with high-efficiency motor regulations. By using PM motors, we will further promote energy saving and realize earth-friendly machine control.
Positionandrun!
The inverter is equipped with a position control function. The MX2 series V1 type is ideal for machines that require simple position control, with new functions such as "repositioning," "position data storage at power-off," and "current position preset."
Speedsynchronisation
Pulse train input function is installed as standard, and V/f control is realized with PG signal feedback. Speed feedback enables stable speed control with high accuracy.
Positioningfunctionality
Allows simple position control without an external controller. Position and origin up to 8 points can be set. You can also switch between speed control and simple position control.
Programandplay!
With the MX2 Series V1 type, you can create smart solutions using the built-in simple sequence function. 1 Task A program of up to 1000 lines can be created, and 5 tasks can be processed in parallel.
Freetoprogram
Inverter programming allows you to create the most appropriate program for your machine. You can run up to 1000 lines of code and 5 tasks concurrently. By offering two programming languages, you have more options. (Support for CX-DriveVer. 2.80 or later)

Spec

Single phase 200 VAC 0.75 kw

Order No.	62-4140-48
Model No.	3G3MX2-AB007-V1
JAN Code	4549734696838
Standard price	JPY: 117,000 USD: 733.91 Excange rate 1USD= 159.42JPY Valid price in Japan
Quantity	1piece

Stock in Japan	-

This page is the page of ［Discontinued］Inverter sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.