Spec

• Ethernet-compliant standards: IEEE 802.3 10 BASE-T, IEEE 802.3 u 100 BASE-TX, IEEE 802.3 ab 1000 BASE-T, IEEE 802.3 x Flow Control, IEEE 802.3 at/IEEE 802.3 af Power over Ethernet (Power Receiving Function/Slave chisel)
• Ethernet data communication speed (specification value): 10/100/1000 Mbps
• Ethernet side communication system: full duplex/half duplex automatic switching
• Ethernet side LAN port: 10/100/1000 BASE-T (RJ- 45 type 8-pole connector) x 1, auto-negotiation/Auto MDI/MDI-X supported * PoE power supply supported on slave side
• Ethernet side transmission distance: up to 100 m
• Ethernet-side connectivity: IEEE 802.3 10 BASE-T, IEEE 802.3 u 100 BASE-TX, IEEE 802.3 ab 1000 BASE-T
• Ethernet PoE power supply: Up to 30.0 W * with an AC adapter connected to the slave. Slave-side chisel power supply is available. / Maximum 15.4 W * When the AC adapter is connected to the master chisel. Slave-side chisel power supply is available.
• Ethernet-compatible PoE powered devices: IEEE 802.3 af and IEEE 802.3 at powered devices * Slave-side chisel powered devices when AC adapter connected to slave units/IEEE 802.3 af powered devices * Slave-side chisel powered devices when AC adapter not connected to slave units
• Coaxial Compliant standards: G.hn (coaxial cable)
• Coaxial data communication speed (specification value): 1000 Mbps * 1
• Coaxial-side communication system: half-duplex system
• Coaxial LAN Port: BNC Terminal (Female)
• Coaxial distance: with IEEE 802.3 af PoE — up to 760 m (5C-FB * 2)/without PoE — up to 1,100 m (5C-FB * 2)
• Coaxial Transmission Distance (When using the optional AC adapter): Maximum 1,100 m (5C-FB * 2, * 3, PoE not supplied, IEEE 802.3 af and IEEE 802.3 at)
• Coaxial Frequency Band: 5 to 95 MHz (G.hn standards 100 MHz plan)
• Coaxial-Side Modulation: OFDM
• Allowable Loss on Coaxial Side: Up to 72 dB
• Coaxial Corresponding Impedance: 50/75 Ω
• Equipment capable of coaxial connection: Made by our company "ECB-G01CX-HJP" * Be sure to use the master unit and slave unit facing each other in a 1: 1 connection. Connection using a distributor/turnout is not possible.
• data transfer methods: store and forward
• MAC address tables: 1K
• Supported Frame Size: 1,522 Bytes
• Supported Features: BPDU/EAPOL Frame Transparency
• standards EMI standards: VCCI Class A
• standards Safety standards Compliant : IEC 61000 -4
• LED PWR: On: power supply On
• LED LAN: on: link up, blinking: data transfer in progress
• LED COAX: lit: link up, blinking: data transfer in progress
• power supply Part rating input Voltage : rating input Voltage AC100 to 240 V ± 10 (50/60 Hz)
• power supply Power Consumption (Without PoC/PoE) : up to 4.0 W (master) : up to 4.8 W (Slave)
• power supply calorific value (Without PoC/PoE) : up to 14.4 kJ/h (master) : up to 17.3 kJ/h (Slave)
• power supply Power Consumption (With PoC/PoE) : up to 30.6 W (master) : up to 39.2 W (Slave)
• power supply calorific value (With PoC/PoE) : up to 110.2 kJ/h (master) : up to 141.2 kJ/h (Slave)
• Operating Temperature: 0 to 50 ° C
• Operating Humidity: 10 to 90% (No condensation)
• Environment Condition Storage Temperature: -20 to 60 ° C
• Ambient Humidity: 5 to 90% (No condensation)
• external dimensions : Width 72 mm x Depth 94.3 mm x Height 39 mm (Excluding Projections)
• Mass: about 300 g (main body only/Master/Slave each)
• Package Contents: Product Body: 2 (1 each master/slave), Dedicated AC Adapter "ECB-EX-AC 54": 1, Dedicated AC power supply Cable (3 pin, about 1.8 m): 1 piece, 3 pin -2 pin Conversion Adapter: 1 piece, Rubber Foot: 4 pieces, Magnet: 4 pieces (screw sets: 4 pieces), Manual: 1 piece, Serial Seal: 2 pieces
• Optional: ECB-G01CX-HJP only AC Adapter: ECB-EX-AC 54
• Warranty: 3 years
• Other: * 1: This value is specification value and is affected by the coaxial cable used and the network environment. *2: coaxial cable used for measurement 5C-FB reference value conductor resistance 20.99 Ω/km (@ 20 ° C), attenuation 6.40 dB/100 m (100 MHz) * The slave unit also requires the connection of an AC adapter.
•