Features

• This product received the Good Design Award in 2011.
• By the function of the original mechanism "RAPCON," the opening and closing operation of the door is controlled softly and smoothly.
• The door can be opened with slight force.
• The door can be stopped at any position within the range of approximately 30° to the fully open position.
• In the range of approximately 0° to 30°, the door closes slowly and is safe even if you release your hand from the door.
• Since it is attached to the lower part of the cabinet top plate, there is less dead space in the height direction than conventional stays, and the stays do not get in the way when mounting shelves.
• Minimum cabinet internal dimension height is 280 mm (when using slide hinge 230 C26/19 T).
• Installation is easy as both left and right can be mounted from the front.
• By turning the screw of the slider, you can adjust the operating feeling when opening and closing.
• Can also be attached to aluminum frame doors.
• Various industrial equipment.
• *There is a difference between right and left.
• *Open and close manually.
• *Never push down the arm of the stay before mounting.
• *If it is installed with the wrong dimensions, it may not function properly such as not closing the door, and may damage the product and the hinge.
• *Do not open or close the door too forcefully, such as opening the door from the fully opened position or moving the door in a hurry.
• *Do not use outside the operating temperature range. Do not use the product in a cabinet that houses a microwave oven that generates heat.
• *Never disassemble or modify the product.
• *When designing the housing (cabinet) and the door, be sure to observe the specified dimensions and the horizontal and vertical mounting positions of the product.
• *If the moment is close to the upper or lower limit of the specified range, check the movement of the actual product.
• *When using screw adhesive, use one that does not damage the resin part.