62-2494-65 Flange Packing 4635 5K50A FF4635-5K50A
FeaturesASONEs="init">
62-2494-65 Flange Packing 4635 5K50A FF4635-5K50A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Ask Technica Corporation
62-2494-65 Flange Packing 4635 5K50A FF4635-5K50A
-
-
-
-
-
-
Features
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
Spec
- Nominal diameter (A): 50
- Inner diameter (mm): 61
- Outer diameter (mm): 130
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 2
- Bolt hole center diameter (mm): 105
- use Pressure (K): 5
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0298
-
Package size：150×170×2 mm 40 g
[About Package size]
Order No.
62-2494-65
Model No.
FF4635-5K50A
JAN Code
4571163735130
Standard price
JPY: 1,090
USD: 6.83
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1sheet
Stock in Japan
Supplier Stock
62-2494-65 Flange Packing 4635 5K50A FF4635-5K50A
Features
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
Spec
- Nominal diameter (A): 50
- Inner diameter (mm): 61
- Outer diameter (mm): 130
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 2
- Bolt hole center diameter (mm): 105
- use Pressure (K): 5
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0298
Package size：150×170×2 mm 40 g [About Package size]
| Order No. | 62-2494-65 | |
|---|---|---|
| Model No. | FF4635-5K50A | |
| JAN Code | 4571163735130 | |
| Standard price |
JPY: 1,090
USD: 6.83
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1sheet | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|