62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A
-
PrintPrintlass="init">
62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Ask Technica Corporation 62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A
Features
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
Spec
- Nominal diameter (A): 15
- Inner diameter (mm): 22
- Outer diameter (mm): 95
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 1/2
- Bolt hole center diameter (mm): 70
- use Pressure (K): 10
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0093
Package sizePackage sizes="init">
62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Ask Technica Corporation 62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A
特徴
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
仕様
- Nominal diameter (A): 15
- Inner diameter (mm): 22
- Outer diameter (mm): 95
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 1/2
- Bolt hole center diameter (mm): 70
- use Pressure (K): 10
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0093
Package sizePackage sizes="init">
62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Ask Technica Corporation 62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A
特徴
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
仕様
- Nominal diameter (A): 15
- Inner diameter (mm): 22
- Outer diameter (mm): 95
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 1/2
- Bolt hole center diameter (mm): 70
- use Pressure (K): 10
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0093
荷姿サイズ：100×130×2 mm 30 g [荷姿サイズについて]
Order No. 62-2494-45 Model No.Model No. class="init"> 62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Ask Technica Corporation 62-2494-45 Flange Packing 4635 10K15A FF4635-10K15A
特徴
- The maximum operating temperature for joint sheet flange packing is 350°C.
- Sufficient compressive strength allows for the same tightening as asbestos products.
- No gasket paste required.
- Asbestos-free joint sheet.
- It can be handled in the same way as conventional asbestos products.
- Heat resistance is improved by using special heat-resistant binder.
- Can withstand rapid temperature and pressure changes.
- High sealing performance can be maintained under high pressure.
- Since there is little adhesion to the flange, construction time can be reduced when replacing the gasket.
- Packing for JIS flange.
- Water-based fluids, oil-based fluids, and gas-based fluids. (Some fluids, such as hydrochloric acid and sodium hydroxide, cannot be used.)
仕様
- Nominal diameter (A): 15
- Inner diameter (mm): 22
- Outer diameter (mm): 95
- Bolt Number of holes: 4
- Bolt hole diameter (mm): 15
- Nominal diameter (B): 1/2
- Bolt hole center diameter (mm): 70
- use Pressure (K): 10
- Operating temperature range: -40 to 350 ℃ (saturated steam 250 ℃)
- Thickness: 2mm
- Material/finish: Heat resistance property high inorganic Fiber and inorganic filler material NBR to add rolling the Sheet
- CODE No.: 785-0093
荷姿サイズ：100×130×2 mm 30 g [荷姿サイズについて]
アズワン品番 62-2494-45 型番 FF4635-10K15A JANコード 4571163735215 Standard price JPY: 584 USD: 3.66 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1sheet Stock in Japan 
Supplier Stock
-
