Features

100BASE-TX compatible metal enclosure 16 port hub with built-in power. It is an eco-friendly power-saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act) and has loop detection function. It is a highly reliable switching hub that does not use an electrolytic capacitor on the main substrate and achieves a long-life design.
100BASE-TX compatible metal enclosure 16 port hub with built-in power.
Eco power saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act).
The main board does not use an electrolytic capacitor. This is a highly reliable switching hub with a long-life design.
It has a loop detection function. The LED lamp flashes to indicate the occurrence of a network loop and to resolve the network failure.
Compatible with operating environment temperature of 50°C. Stable operation even in harsh environments without air conditioning.
AC power cable and conversion adapter with tracking protection. Prevents tracking due to dust even when installed for a long period of time.
19 inch rack mount is possible using the included mounting bracket. There is a wall mounting hole on the back of the main body, so it can be mounted on a wall. You can also install it on a metal surface by installing an optional magnet.

Spec

Connection method: 100 BASE-TX/10 BASE-T
Network type: IEEE 802.3 u/IEEE 802.3
switching methods: store and forward
Buffer Memory: 256 Kbytes (Assign dynamically to each port)
Flow Control Control: IEEE 802.3 x (Full duplex), Back Pressure (Half-duplex)
Switch Fabric: 3.2 Gbps
Max Packet Forwarding ability: 2.4 Mpps
Filtering speed: 148800 packets per second (100 Mbps), 14880 packets per second (10 Mbps)
MAC address registrations: 8,000 (Total All Ports)
number of ports — 16 ports
AutoMDI/MDI-X: Yes
auto-negotiation: supported (100/10 Mbps)
Connector Shape: RJ -45 x 16
Compatible cable: 10 BASE-T: UTP Category 3 or higher, 100 BASE-TX: UTP Category 5 or higher
non-blocking: supported
Jumbo Frames – Yes (2 Kbytes)
loop detection: loop detection
MTBF: 750,000 hours
EAP transparency: supported
BPDU transparency: supported
Input Voltage: AC100 to 240 V ± 10% 50/60 Hz
Power Consumption (rating): 2.3 W maximum
calorific value: Up to approx. 8.3 kJ/h
Power-Saving Features: Easy Power saving E (IEEE 802.3 az) Support
Energy efficiency: 1.4 W/Gbps
Maximum effective transmission rate: 1.6 Gbps
external dimensions (Width x Depth x Height) : Approx . 215.0 x Approx . 130.0 x Approx . 44.0 mm (main body only)
Mass: about 820 g
Housing material (Color): Metal (White)
Operating Conditions: Temperature: 0 ° C to 50 ° C Humidity: 10% to 90% (However, there is no condensation.)
Storage Environmental Conditions: Temperature: -40 ° C to 70 ° C Humidity: 5% to 90% (However, there is no condensation.)
Mounting: Horizontal, Wall-mounted, 19 ” rack-mounted
Wall mounting holes: Yes
Warranty period: 1 year
Compliance with laws and regulations: RoHS compliance
Compatible standards: VCCI ClassA
Accessories: Dedicated AC power supply Cable (3 pin, about 1.8 m): 1 piece, 3 pin -2 pin Conversion Adapter: 1 piece, AC Cable-Prevention Band: 1 piece, 19 inch Rack Mounting metal bracket: 2 pieces, 19 inch Rack Mounting metal bracket Screw: 8 pieces, Rubber Foot: 4 pieces, For Safety: 1 piece
Compliance with EU RoHS Directive

Package sizePackage sizes="init"> ［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW 62-2038-67 【AXEL GLOBAL】 アズワン

取扱点数300万点

How to use

Quote Other Requests

ELECOM CO., LTD

62-2038-67　［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW

印刷

メーカー商品情報

特徴

100BASE-TX compatible metal enclosure 16 port hub with built-in power. It is an eco-friendly power-saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act) and has loop detection function. It is a highly reliable switching hub that does not use an electrolytic capacitor on the main substrate and achieves a long-life design.
100BASE-TX compatible metal enclosure 16 port hub with built-in power.
Eco power saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act).
The main board does not use an electrolytic capacitor. This is a highly reliable switching hub with a long-life design.
It has a loop detection function. The LED lamp flashes to indicate the occurrence of a network loop and to resolve the network failure.
Compatible with operating environment temperature of 50°C. Stable operation even in harsh environments without air conditioning.
AC power cable and conversion adapter with tracking protection. Prevents tracking due to dust even when installed for a long period of time.
19 inch rack mount is possible using the included mounting bracket. There is a wall mounting hole on the back of the main body, so it can be mounted on a wall. You can also install it on a metal surface by installing an optional magnet.

仕様

Connection method: 100 BASE-TX/10 BASE-T
Network type: IEEE 802.3 u/IEEE 802.3
switching methods: store and forward
Buffer Memory: 256 Kbytes (Assign dynamically to each port)
Flow Control Control: IEEE 802.3 x (Full duplex), Back Pressure (Half-duplex)
Switch Fabric: 3.2 Gbps
Max Packet Forwarding ability: 2.4 Mpps
Filtering speed: 148800 packets per second (100 Mbps), 14880 packets per second (10 Mbps)
MAC address registrations: 8,000 (Total All Ports)
number of ports — 16 ports
AutoMDI/MDI-X: Yes
auto-negotiation: supported (100/10 Mbps)
Connector Shape: RJ -45 x 16
Compatible cable: 10 BASE-T: UTP Category 3 or higher, 100 BASE-TX: UTP Category 5 or higher
non-blocking: supported
Jumbo Frames – Yes (2 Kbytes)
loop detection: loop detection
MTBF: 750,000 hours
EAP transparency: supported
BPDU transparency: supported
Input Voltage: AC100 to 240 V ± 10% 50/60 Hz
Power Consumption (rating): 2.3 W maximum
calorific value: Up to approx. 8.3 kJ/h
Power-Saving Features: Easy Power saving E (IEEE 802.3 az) Support
Energy efficiency: 1.4 W/Gbps
Maximum effective transmission rate: 1.6 Gbps
external dimensions (Width x Depth x Height) : Approx . 215.0 x Approx . 130.0 x Approx . 44.0 mm (main body only)
Mass: about 820 g
Housing material (Color): Metal (White)
Operating Conditions: Temperature: 0 ° C to 50 ° C Humidity: 10% to 90% (However, there is no condensation.)
Storage Environmental Conditions: Temperature: -40 ° C to 70 ° C Humidity: 5% to 90% (However, there is no condensation.)
Mounting: Horizontal, Wall-mounted, 19 ” rack-mounted
Wall mounting holes: Yes
Warranty period: 1 year
Compliance with laws and regulations: RoHS compliance
Compatible standards: VCCI ClassA
Accessories: Dedicated AC power supply Cable (3 pin, about 1.8 m): 1 piece, 3 pin -2 pin Conversion Adapter: 1 piece, AC Cable-Prevention Band: 1 piece, 19 inch Rack Mounting metal bracket: 2 pieces, 19 inch Rack Mounting metal bracket Screw: 8 pieces, Rubber Foot: 4 pieces, For Safety: 1 piece
Compliance with EU RoHS Directive

Package size：267×277×72 mm　1.69 kg　 [荷姿サイズについて]

Order No.Order No.ss="init"> ［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW 62-2038-67 【AXEL GLOBAL】 アズワン

取扱点数300万点

How to use

Quote Other Requests

ELECOM CO., LTD

62-2038-67　［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW

印刷

メーカー商品情報

特徴

100BASE-TX compatible metal enclosure 16 port hub with built-in power. It is an eco-friendly power-saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act) and has loop detection function. It is a highly reliable switching hub that does not use an electrolytic capacitor on the main substrate and achieves a long-life design.
100BASE-TX compatible metal enclosure 16 port hub with built-in power.
Eco power saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act).
The main board does not use an electrolytic capacitor. This is a highly reliable switching hub with a long-life design.
It has a loop detection function. The LED lamp flashes to indicate the occurrence of a network loop and to resolve the network failure.
Compatible with operating environment temperature of 50°C. Stable operation even in harsh environments without air conditioning.
AC power cable and conversion adapter with tracking protection. Prevents tracking due to dust even when installed for a long period of time.
19 inch rack mount is possible using the included mounting bracket. There is a wall mounting hole on the back of the main body, so it can be mounted on a wall. You can also install it on a metal surface by installing an optional magnet.

仕様

Connection method: 100 BASE-TX/10 BASE-T
Network type: IEEE 802.3 u/IEEE 802.3
switching methods: store and forward
Buffer Memory: 256 Kbytes (Assign dynamically to each port)
Flow Control Control: IEEE 802.3 x (Full duplex), Back Pressure (Half-duplex)
Switch Fabric: 3.2 Gbps
Max Packet Forwarding ability: 2.4 Mpps
Filtering speed: 148800 packets per second (100 Mbps), 14880 packets per second (10 Mbps)
MAC address registrations: 8,000 (Total All Ports)
number of ports — 16 ports
AutoMDI/MDI-X: Yes
auto-negotiation: supported (100/10 Mbps)
Connector Shape: RJ -45 x 16
Compatible cable: 10 BASE-T: UTP Category 3 or higher, 100 BASE-TX: UTP Category 5 or higher
non-blocking: supported
Jumbo Frames – Yes (2 Kbytes)
loop detection: loop detection
MTBF: 750,000 hours
EAP transparency: supported
BPDU transparency: supported
Input Voltage: AC100 to 240 V ± 10% 50/60 Hz
Power Consumption (rating): 2.3 W maximum
calorific value: Up to approx. 8.3 kJ/h
Power-Saving Features: Easy Power saving E (IEEE 802.3 az) Support
Energy efficiency: 1.4 W/Gbps
Maximum effective transmission rate: 1.6 Gbps
external dimensions (Width x Depth x Height) : Approx . 215.0 x Approx . 130.0 x Approx . 44.0 mm (main body only)
Mass: about 820 g
Housing material (Color): Metal (White)
Operating Conditions: Temperature: 0 ° C to 50 ° C Humidity: 10% to 90% (However, there is no condensation.)
Storage Environmental Conditions: Temperature: -40 ° C to 70 ° C Humidity: 5% to 90% (However, there is no condensation.)
Mounting: Horizontal, Wall-mounted, 19 ” rack-mounted
Wall mounting holes: Yes
Warranty period: 1 year
Compliance with laws and regulations: RoHS compliance
Compatible standards: VCCI ClassA
Accessories: Dedicated AC power supply Cable (3 pin, about 1.8 m): 1 piece, 3 pin -2 pin Conversion Adapter: 1 piece, AC Cable-Prevention Band: 1 piece, 19 inch Rack Mounting metal bracket: 2 pieces, 19 inch Rack Mounting metal bracket Screw: 8 pieces, Rubber Foot: 4 pieces, For Safety: 1 piece
Compliance with EU RoHS Directive

荷姿サイズ：267×277×72 mm　1.69 kg　 [荷姿サイズについて]

アズワン品番 62-2038-67

Model No.ASONEs="init"> ［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW 62-2038-67 【AXEL GLOBAL】 アズワン

Listed products : 3 milion products

How to use

Quote Other Requests

ELECOM CO., LTD

62-2038-67　［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports　EHC-F16MN-HW

Products Information

Features

100BASE-TX compatible metal enclosure 16 port hub with built-in power. It is an eco-friendly power-saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act) and has loop detection function. It is a highly reliable switching hub that does not use an electrolytic capacitor on the main substrate and achieves a long-life design.
100BASE-TX compatible metal enclosure 16 port hub with built-in power.
Eco power saving type compliant with the Act on the Rational Use of Energy (Energy Conservation Act).
The main board does not use an electrolytic capacitor. This is a highly reliable switching hub with a long-life design.
It has a loop detection function. The LED lamp flashes to indicate the occurrence of a network loop and to resolve the network failure.
Compatible with operating environment temperature of 50°C. Stable operation even in harsh environments without air conditioning.
AC power cable and conversion adapter with tracking protection. Prevents tracking due to dust even when installed for a long period of time.
19 inch rack mount is possible using the included mounting bracket. There is a wall mounting hole on the back of the main body, so it can be mounted on a wall. You can also install it on a metal surface by installing an optional magnet.

Spec

Connection method: 100 BASE-TX/10 BASE-T
Network type: IEEE 802.3 u/IEEE 802.3
switching methods: store and forward
Buffer Memory: 256 Kbytes (Assign dynamically to each port)
Flow Control Control: IEEE 802.3 x (Full duplex), Back Pressure (Half-duplex)
Switch Fabric: 3.2 Gbps
Max Packet Forwarding ability: 2.4 Mpps
Filtering speed: 148800 packets per second (100 Mbps), 14880 packets per second (10 Mbps)
MAC address registrations: 8,000 (Total All Ports)
number of ports — 16 ports
AutoMDI/MDI-X: Yes
auto-negotiation: supported (100/10 Mbps)
Connector Shape: RJ -45 x 16
Compatible cable: 10 BASE-T: UTP Category 3 or higher, 100 BASE-TX: UTP Category 5 or higher
non-blocking: supported
Jumbo Frames – Yes (2 Kbytes)
loop detection: loop detection
MTBF: 750,000 hours
EAP transparency: supported
BPDU transparency: supported
Input Voltage: AC100 to 240 V ± 10% 50/60 Hz
Power Consumption (rating): 2.3 W maximum
calorific value: Up to approx. 8.3 kJ/h
Power-Saving Features: Easy Power saving E (IEEE 802.3 az) Support
Energy efficiency: 1.4 W/Gbps
Maximum effective transmission rate: 1.6 Gbps
external dimensions (Width x Depth x Height) : Approx . 215.0 x Approx . 130.0 x Approx . 44.0 mm (main body only)
Mass: about 820 g
Housing material (Color): Metal (White)
Operating Conditions: Temperature: 0 ° C to 50 ° C Humidity: 10% to 90% (However, there is no condensation.)
Storage Environmental Conditions: Temperature: -40 ° C to 70 ° C Humidity: 5% to 90% (However, there is no condensation.)
Mounting: Horizontal, Wall-mounted, 19 ” rack-mounted
Wall mounting holes: Yes
Warranty period: 1 year
Compliance with laws and regulations: RoHS compliance
Compatible standards: VCCI ClassA
Accessories: Dedicated AC power supply Cable (3 pin, about 1.8 m): 1 piece, 3 pin -2 pin Conversion Adapter: 1 piece, AC Cable-Prevention Band: 1 piece, 19 inch Rack Mounting metal bracket: 2 pieces, 19 inch Rack Mounting metal bracket Screw: 8 pieces, Rubber Foot: 4 pieces, For Safety: 1 piece
Compliance with EU RoHS Directive

Package size：267×277×72 mm　1.69 kg　 [About Package size]

Order No.	62-2038-67
Model No.	EHC-F16MN-HW
JAN Code	4953103461529
Standard price	JPY: 7,250 USD: 45.48 Excange rate 1USD= 159.42JPY Valid price in Japan
Quantity	1piece

Stock in Japan	-

This page is the page of ［Discontinued］100 BASE-TX capable switching hub metal enclosure 16 ports sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.