特徴

A compact corner impact wrench with high power.
By designing the hammer part horizontally, the striking force is transmitted directly and there is no power loss.
Since there is little recoil to the main body during work, there is little chance of unexpected hand waving and it is safe.
More compact than the GT-C1400. For small tillers and tractors.
1.1 kg lighter than other products with similar power. The long work load is drastically reduced.
The outer dimension is compact, so it has excellent work efficiency for bolting tight parts.
Energy-saving design. It doesn't waste energy.
For nut tightening and loosening work in narrow places.
For claw replacement work of agricultural equipment (rotary for tractor).

仕様

Bolt Diameter (mm): 10
Socket Bayonet angle (mm): 9.5
maximum clamping torque (N, m): 100
no load Speed r.p.m. (rpm): 7000
Air consumption (m3/min): 0.25
Hose mounting opening: Rc1/4
exhaust: 360 ° Rotation allowed
Length (mm): 257
Hammer Type: Single Hammer
use Air Pressure (MPa): 0.6
no load Speed r.p.m. (min ^ 1): 7000
use of air Hose inner diameter: 6.35mm
use Air Pressure: 0. 6MPa
Left and right switching, power adjusting dial (4 Stage)
exhaust direction but 360 degrees change is Silencer-with
capacity: normal Bolt Diameter 10 mm
9.5 mm angle drive (littinae Ring type)
Material, finish: Body/aluminum/anvil portion, Hammer, gear portion/iron
Set content: Outlet BPB 2… 1, L type wrench (opposite side 4mm)… 1, L type wrench (opposite side 3mm)… 1
* Length/Weight: Accessories is not including
* tightening torque is standard value.
* conditions by the torque value instead.
CODE No.: 758-6914

Package sizePackage sizes="init"> ［Discontinued］Corner Impact Wrench　GT-C900 61-8783-35 【AXEL GLOBAL】 アズワン

取扱点数300万点

How to use

Quote Other Requests

VESSEL CO., INC.

61-8783-35　［Discontinued］Corner Impact Wrench　GT-C900

印刷

特徴

A compact corner impact wrench with high power.
By designing the hammer part horizontally, the striking force is transmitted directly and there is no power loss.
Since there is little recoil to the main body during work, there is little chance of unexpected hand waving and it is safe.
More compact than the GT-C1400. For small tillers and tractors.
1.1 kg lighter than other products with similar power. The long work load is drastically reduced.
The outer dimension is compact, so it has excellent work efficiency for bolting tight parts.
Energy-saving design. It doesn't waste energy.
For nut tightening and loosening work in narrow places.
For claw replacement work of agricultural equipment (rotary for tractor).

仕様

Bolt Diameter (mm): 10
Socket Bayonet angle (mm): 9.5
maximum clamping torque (N, m): 100
no load Speed r.p.m. (rpm): 7000
Air consumption (m3/min): 0.25
Hose mounting opening: Rc1/4
exhaust: 360 ° Rotation allowed
Length (mm): 257
Hammer Type: Single Hammer
use Air Pressure (MPa): 0.6
no load Speed r.p.m. (min ^ 1): 7000
use of air Hose inner diameter: 6.35mm
use Air Pressure: 0. 6MPa
Left and right switching, power adjusting dial (4 Stage)
exhaust direction but 360 degrees change is Silencer-with
capacity: normal Bolt Diameter 10 mm
9.5 mm angle drive (littinae Ring type)
Material, finish: Body/aluminum/anvil portion, Hammer, gear portion/iron
Set content: Outlet BPB 2… 1, L type wrench (opposite side 4mm)… 1, L type wrench (opposite side 3mm)… 1
* Length/Weight: Accessories is not including
* tightening torque is standard value.
* conditions by the torque value instead.
CODE No.: 758-6914

荷姿サイズ：93×290×78 mm　1.9 kg　 [荷姿サイズについて]

Order No.	61-8783-35
Model No.	GT-C900
JAN Code	4907587303301
標準価格	JPY: 89,688 USD: 562.59 Excange rate 1USD= 159.42JPY Valid price in Japan
Quantity	1unit

Stock in Japan	-

This page is the page of ［Discontinued］Corner Impact Wrench sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.

Explore AXEL

How to use

User’s Guide

For Re-sellerFor Re-seller> ［Discontinued］Corner Impact Wrench　GT-C900 61-8783-35 【AXEL GLOBAL】 アズワン

取扱点数300万点

How to use

Quote Other Requests

VESSEL CO., INC.

61-8783-35　［Discontinued］Corner Impact Wrench　GT-C900

印刷

特徴

A compact corner impact wrench with high power.
By designing the hammer part horizontally, the striking force is transmitted directly and there is no power loss.
Since there is little recoil to the main body during work, there is little chance of unexpected hand waving and it is safe.
More compact than the GT-C1400. For small tillers and tractors.
1.1 kg lighter than other products with similar power. The long work load is drastically reduced.
The outer dimension is compact, so it has excellent work efficiency for bolting tight parts.
Energy-saving design. It doesn't waste energy.
For nut tightening and loosening work in narrow places.
For claw replacement work of agricultural equipment (rotary for tractor).

仕様

Bolt Diameter (mm): 10
Socket Bayonet angle (mm): 9.5
maximum clamping torque (N, m): 100
no load Speed r.p.m. (rpm): 7000
Air consumption (m3/min): 0.25
Hose mounting opening: Rc1/4
exhaust: 360 ° Rotation allowed
Length (mm): 257
Hammer Type: Single Hammer
use Air Pressure (MPa): 0.6
no load Speed r.p.m. (min ^ 1): 7000
use of air Hose inner diameter: 6.35mm
use Air Pressure: 0. 6MPa
Left and right switching, power adjusting dial (4 Stage)
exhaust direction but 360 degrees change is Silencer-with
capacity: normal Bolt Diameter 10 mm
9.5 mm angle drive (littinae Ring type)
Material, finish: Body/aluminum/anvil portion, Hammer, gear portion/iron
Set content: Outlet BPB 2… 1, L type wrench (opposite side 4mm)… 1, L type wrench (opposite side 3mm)… 1
* Length/Weight: Accessories is not including
* tightening torque is standard value.
* conditions by the torque value instead.
CODE No.: 758-6914

荷姿サイズ：93×290×78 mm　1.9 kg　 [荷姿サイズについて]

アズワン品番	61-8783-35
型番	GT-C900
JANコード	4907587303301
標準価格	JPY: 89,688 USD: 562.59 Excange rate 1USD= 159.42JPY Valid price in Japan
入り数	1unit

在庫数	-

[$1]［Discontinued］Corner Impact Wrench[/$1]