61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
FeaturesFeatures class="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Miyanaga Co., Ltd.
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
-
-
-
-
-
-
-
-
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
SpecSpec class="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Miyanaga Co., Ltd.
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
-
-
-
-
-
-
-
-
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
仕様
- Effective Length (mm): 130 (Cutter Length: 150 mm)
- Center Drill: PCGWCD 225, PCHWCD 225, PCBHCD 225
- polyclick guide bars: PCGWGB
- Suitable Material: Metal siding using galbarium steel sheet, wood, plywood, metal siding, ceramic-based siding (hard ceramic-based siding is not allowed.). Use our company Hyperdia Core Drill. ) Plastic drainage mass, PVC pipe, FRP, ALC (especially wet ALC), Japan Wall, light gauge steel framing
- Applicable Motor: Electric Drill (Please use for rotation only.)
- Flute Diameter (mm): 25
-
Order No.
61-4922-86
Model No.
PCGW25
JANコード
4957462213973
Standard price
JPY: 22,350
USD: 140.20
Excange rate 1USD= 159.42JPY
Valid price in Japan
QuantityQuantityass="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Miyanaga Co., Ltd.
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
-
-
-
-
-
-
-
-
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
仕様
- Effective Length (mm): 130 (Cutter Length: 150 mm)
- Center Drill: PCGWCD 225, PCHWCD 225, PCBHCD 225
- polyclick guide bars: PCGWGB
- Suitable Material: Metal siding using galbarium steel sheet, wood, plywood, metal siding, ceramic-based siding (hard ceramic-based siding is not allowed.). Use our company Hyperdia Core Drill. ) Plastic drainage mass, PVC pipe, FRP, ALC (especially wet ALC), Japan Wall, light gauge steel framing
- Applicable Motor: Electric Drill (Please use for rotation only.)
- Flute Diameter (mm): 25
-
アズワン品番
61-4922-86
型番
PCGW25
JANコード
4957462213973
標準価格
JPY: 22,350
USD: 140.20
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1set
在庫数
Supplier Stock
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
SpecSpec class="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Miyanaga Co., Ltd.
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
-
-
-
-
-
-
-
-
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
仕様
- Effective Length (mm): 130 (Cutter Length: 150 mm)
- Center Drill: PCGWCD 225, PCHWCD 225, PCBHCD 225
- polyclick guide bars: PCGWGB
- Suitable Material: Metal siding using galbarium steel sheet, wood, plywood, metal siding, ceramic-based siding (hard ceramic-based siding is not allowed.). Use our company Hyperdia Core Drill. ) Plastic drainage mass, PVC pipe, FRP, ALC (especially wet ALC), Japan Wall, light gauge steel framing
- Applicable Motor: Electric Drill (Please use for rotation only.)
- Flute Diameter (mm): 25
-
Order No.
61-4922-86
Model No.
PCGW25
JANコード
4957462213973
Standard price
JPY: 22,350
USD: 140.20
Excange rate 1USD= 159.42JPY
Valid price in Japan
QuantityQuantityass="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Miyanaga Co., Ltd.
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
-
-
-
-
-
-
-
-
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
仕様
- Effective Length (mm): 130 (Cutter Length: 150 mm)
- Center Drill: PCGWCD 225, PCHWCD 225, PCBHCD 225
- polyclick guide bars: PCGWGB
- Suitable Material: Metal siding using galbarium steel sheet, wood, plywood, metal siding, ceramic-based siding (hard ceramic-based siding is not allowed.). Use our company Hyperdia Core Drill. ) Plastic drainage mass, PVC pipe, FRP, ALC (especially wet ALC), Japan Wall, light gauge steel framing
- Applicable Motor: Electric Drill (Please use for rotation only.)
- Flute Diameter (mm): 25
-
アズワン品番
61-4922-86
型番
PCGW25
JANコード
4957462213973
標準価格
JPY: 22,350
USD: 140.20
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1set
在庫数
Supplier Stock
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25
特徴
- Unique chip shape improves metal bite.
- The use of a two-stage blade ensures smooth discharge of chips.
- Securely cut the nail without being bitten.
- Composite materials and layered plates can be penetrated with one shot.
- Use of the guide bar does not enlarge the center hole, and drilling of metallic siding using galvanic steel sheet can be performed cleanly and safely.
- ALC (especially wet ALC) also perforates smoothly without clogging the chips.
- Use an electric motor with a clutch for safety. (As much as possible, be careful not to push the clutch too far.)
- Use a polyclick guide bar for drilling metal siding using galvanic steel plates.
- If the cutter cuts into the hole during drilling, remove the center drill from the shank before drilling.
仕様
- Effective Length (mm): 130 (Cutter Length: 150 mm)
- Center Drill: PCGWCD 225, PCHWCD 225, PCBHCD 225
- polyclick guide bars: PCGWGB
- Suitable Material: Metal siding using galbarium steel sheet, wood, plywood, metal siding, ceramic-based siding (hard ceramic-based siding is not allowed.). Use our company Hyperdia Core Drill. ) Plastic drainage mass, PVC pipe, FRP, ALC (especially wet ALC), Japan Wall, light gauge steel framing
- Applicable Motor: Electric Drill (Please use for rotation only.)
- Flute Diameter (mm): 25
| Order No. | 61-4922-86 | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | PCGW25 | |||||||||||||||||
| JANコード | 4957462213973 | |||||||||||||||||
| Standard price |
JPY: 22,350
USD: 140.20
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|||||||||||||||||
QuantityQuantityass="init">
61-4922-86 PolyClick Galvawood Core Set 25 x 130 PCGW25特徴
仕様
| ||||||||||||||||||