61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C
-
PrintPrintlass="init">
61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Miyanaga Co., Ltd. 61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C
Features
- Due to the unique cutting edge shape, nails do not bite in and can be cut safely.
- Replace the center drill with PCHWCD225 (carbide) or PCHWCD175 (carbide) when drilling ceramic-based siding.
- Please use our company "Hyperdia Core Drill" for hard ceramic siding.
- In the case of metal siding, the thickness of the metal part can be perforated up to approximately 0.5, but it is not suitable when the surface of the metal part is planar (no small irregularities).
- Use "Gulboud Core Drill" when drilling thick wood.
- If the ceramic siding board is not scratched by a 10 yen coin or a nail, use our company "Hypa."
Spec
- Effective Length (mm): 130 (Cutter Length: 160 mm)
- Supported shanks: PCSKL, PCSKLR, PCSKXMXK, PCSKXR
- For drilling metal siding, ceramic siding, wood, gypsum board, veneer, laminated wood, slate, floor panel, PVC, artificial marble, FRP, etc.
- For pilot hole where downlights, sensors and fire alarms are installed on wooden ceiling materials.
- Applicable Electric Motor: Electric Drill (Use Only for Rotation)
- Flute Diameter (mm): 200
Order No. 61-4914-40 Model No. PCWS200C JAN Code 4957462111477 標準価格 JPY: 42,900 USD: 269.10 Excange rate 1USD= 159.42JPY
Valid price in JapanQuantityQuantityass="init"> 61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Miyanaga Co., Ltd. 61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C
特徴
- Due to the unique cutting edge shape, nails do not bite in and can be cut safely.
- Replace the center drill with PCHWCD225 (carbide) or PCHWCD175 (carbide) when drilling ceramic-based siding.
- Please use our company "Hyperdia Core Drill" for hard ceramic siding.
- In the case of metal siding, the thickness of the metal part can be perforated up to approximately 0.5, but it is not suitable when the surface of the metal part is planar (no small irregularities).
- Use "Gulboud Core Drill" when drilling thick wood.
- If the ceramic siding board is not scratched by a 10 yen coin or a nail, use our company "Hypa."
仕様
- Effective Length (mm): 130 (Cutter Length: 160 mm)
- Supported shanks: PCSKL, PCSKLR, PCSKXMXK, PCSKXR
- For drilling metal siding, ceramic siding, wood, gypsum board, veneer, laminated wood, slate, floor panel, PVC, artificial marble, FRP, etc.
- For pilot hole where downlights, sensors and fire alarms are installed on wooden ceiling materials.
- Applicable Electric Motor: Electric Drill (Use Only for Rotation)
- Flute Diameter (mm): 200
アズワン品番 61-4914-40 型番 PCWS200C JANコード 4957462111477 標準価格 JPY: 42,900 USD: 269.10 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece 在庫数 
Supplier Stock
This page is the page of PolyClick Wooding Core Cutter 200 x 130 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of PolyClick Wooding Core Cutter 200 x 130 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.
61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
Miyanaga Co., Ltd. 61-4914-40 PolyClick Wooding Core Cutter 200 x 130 PCWS200C
特徴
- Due to the unique cutting edge shape, nails do not bite in and can be cut safely.
- Replace the center drill with PCHWCD225 (carbide) or PCHWCD175 (carbide) when drilling ceramic-based siding.
- Please use our company "Hyperdia Core Drill" for hard ceramic siding.
- In the case of metal siding, the thickness of the metal part can be perforated up to approximately 0.5, but it is not suitable when the surface of the metal part is planar (no small irregularities).
- Use "Gulboud Core Drill" when drilling thick wood.
- If the ceramic siding board is not scratched by a 10 yen coin or a nail, use our company "Hypa."
仕様
- Effective Length (mm): 130 (Cutter Length: 160 mm)
- Supported shanks: PCSKL, PCSKLR, PCSKXMXK, PCSKXR
- For drilling metal siding, ceramic siding, wood, gypsum board, veneer, laminated wood, slate, floor panel, PVC, artificial marble, FRP, etc.
- For pilot hole where downlights, sensors and fire alarms are installed on wooden ceiling materials.
- Applicable Electric Motor: Electric Drill (Use Only for Rotation)
- Flute Diameter (mm): 200
アズワン品番 61-4914-40 型番 PCWS200C JANコード 4957462111477 標準価格 JPY: 42,900 USD: 269.10 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece 在庫数
サプライヤ在庫
-
