Spec

• Filtration area, m²: 0.21
• Filter bore diameter, μm: 0.2
• Length, Inch (cm): 7.7 (19.6)
• Support material: Polypropylene
• Seal material: Silicone
• Device material: Polypropylene
• Vent cap material: Polypropylene
• Material: Hydrophobicity PTFE
• Housing: Polypropylene
• Filter brand name: Aervent
• Brand name: Opticap
• Main application: Laboratory Filtration
• Substitute: KTGR04TC3
• Package: Double easy open bag
• Form: Capsule
• Connection, Inlet/outlet: 38mm (1-1/2in.) sanitary flange
• Quantity/box: 3
• Overview: Opticap XL4 Aervent 0.2μm 1-1/2in. TC/TC
• Product name: Opticap XL capsule filter
• Maximum Inlet Pressure (psig): 80
• Maximum Inlet Temperature, °C: 25
• Hydro-Core test: 0.25?mL/min @ 260?kPa (38?psig)
• Bubble point, 23 °C: 110kPa (16psig) 70/30% IPA/water
• Maximum input pressure, kPa (psi): 552 (80) @ 25°C; 276 (40) @ 60°C; 103 (15) @ 80°C
• Maximum differential pressure, kPa (psid): Normal direction - 552 (80) at 25℃; 103 (15) at 80℃; reverse direction - 414 (60) at 25℃, intermittent
• Wettability: Hydrophobicity
• Sterilization: Autoclave sterilization at 135℃ for 30 minutes for 30 times; in-line steam sterilization is unavailable
• Sterility: No sterilization
• Nitrogen diffusion flow rate, 23 °C: 9mL/min at 96.5kPa (14psig) 70//30% IPA/water
• Total extract: The extractables level was equal to or less than 15mg after 24hours in a 70/30%IPA/water mixture at controlled room temperature.
•