61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
Features
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
SpecSpec class="init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Hanna Instruments
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
-
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
-
Package sizePackage sizes="init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Hanna Instruments
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
-
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
-
荷姿サイズ：505×335×275 mm 1 kg
[荷姿サイズについて]
Order No.
61-0117-82
型番
HI93414
JANコード
4580304566410
Standard price
JPY: 330,000
USD: 2,053.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
QuantityQuantityass="init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Hanna Instruments
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
-
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
-
荷姿サイズ：505×335×275 mm 1 kg
[荷姿サイズについて]
アズワン品番
61-0117-82
型番
HI93414
JANコード
4580304566410
標準価格
JPY: 330,000
USD: 2,053.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1set
Stock in Japan
Supplier StockSupplier Stock"init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Hanna Instruments
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
-
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
-
荷姿サイズ：505×335×275 mm 1 kg
[荷姿サイズについて]
アズワン品番
61-0117-82
型番
HI93414
JANコード
4580304566410
標準価格
JPY: 330,000
USD: 2,053.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1set
在庫数
サプライヤ在庫
This page is the page of Portable Turbidity/Residual Chlorine Meter HI 93414 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Portable Turbidity/Residual Chlorine Meter HI 93414 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414 【AXEL GLOBAL】 アズワン
Contact us
Hanna Instruments
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
-
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
-
荷姿サイズ：505×335×275 mm 1 kg
[荷姿サイズについて]
アズワン品番
61-0117-82
型番
HI93414
JANコード
4580304566410
標準価格
JPY: 330,000
USD: 2,053.26
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1set
在庫数
サプライヤ在庫
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
Package sizePackage sizes="init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
特徴
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in use
- Battery level indicator when power is on
- Current time is always displayed on the LCD
仕様
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of unused time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
荷姿サイズ：505×335×275 mm 1 kg [荷姿サイズについて]
| Order No. | 61-0117-82 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 型番 | HI93414 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| JANコード | 4580304566410 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard price |
JPY: 330,000
USD: 2,053.26
Excange rate 1USD= 160.72JPY
Valid price in Japan |
||||||||||||||||||||||||||||||||||||||||||||||||||||
QuantityQuantityass="init">
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414特徴
仕様
荷姿サイズ：505×335×275 mm 1 kg [荷姿サイズについて]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||